India Indian Cruise Missile Programs

Nilgiri

Experienced member
Moderator
Aviation Specialist
Messages
9,304
Reactions
96 18,875
Nation of residence
Canada
Nation of origin
India
Moved brahmos test convo here....(cruise missile)
 

Gessler

Contributor
Moderator
India Moderator
Messages
816
Reactions
38 1,797
Nation of residence
India
Nation of origin
India

Dunno about this...this should have been a strategic program with highest priority accorded, but the lack of any visible progress for over a decade (first time the LFRJ project was revealed was in 2010) indicates the program may have been abandoned as a means of strategic nuclear delivery - the focus may have shifted to Scramjet-based Hypersonic systems instead.


The LFRJ R&D may be now revived as a means of developing training targets to mimic missiles like the Chinese YJ-12/YJ-18.
 

Gessler

Contributor
Moderator
India Moderator
Messages
816
Reactions
38 1,797
Nation of residence
India
Nation of origin
India
The MANIK turbofan engine developed by GTRE.

The 400kgf (~4 kN) turbofan is meant to power long-range subsonic cruise missiles and was recently test-flown for the first time on a ITCM (version of Nirbhay with indigenous engine) LACM.

FCS6AsjWECMAeUf.jpg
 

Nilgiri

Experienced member
Moderator
Aviation Specialist
Messages
9,304
Reactions
96 18,875
Nation of residence
Canada
Nation of origin
India

The Brahmos-NG is smaller, lighter and has smarter dimensions and is being designed for deployment on a wider number of modern military platforms.

The Defence Research and Development Organisation (DRDO) is establishing a BrahMos manufacturing centre in Lucknow, the capital of Uttar Pradesh. The facility, on 200 acres, will manufacture the new Brahmos-NG (Next Generation) variant of the medium-range ramjet supersonic cruise missile that can be launched from submarine, ship, aircraft or land. It will be ready over the next two to three years and is expected to commence production at a rate of 80-100 Brahmos-NG missiles a year.

The manufacturing centre, announced by BrahMos Aerospace, will be a modern, state-of-art facility in the Lucknow node of the Uttar Pradesh Defence Industrial Corridor. The foundation stone for the centre, along with that for the Defence Technology and Test Centre (DTTC), was laid by Defence Minister Rajnath Singh on December 26.

The Brahmos-NG is smaller, lighter and has smarter dimensions and is being designed for deployment on a wider number of modern military platforms. It will hugely bolster the Indian military’s modern combat capability and flexibility during the next few years.

Commenting on the DTTC, a spokesperson for the Defence Ministry stated: "The first-of-its-kind Defence Technologies and Test Centre, spread over approximately 22 acres is being set up to accelerate the growth of the defence and aerospace manufacturing clusters in Uttar Pradesh Defence Industrial Corridor. It will consist of six sub-centres — Deep-Tech Innovation and Start up Incubation Centre, Design and Simulation Centre, Testing and Evaluation Centre, Centre for Industry 4.0/Digital Manufacturing, Skill Development Centre and a Business Development Centre."

The DTTC will follow the design-build-test-learn cycle for technology consultancy and hand-holding of deep-tech start-ups and industries. Explained the spokesperson: "The DTTC will facilitate industries through establishing a centralised state-of-the-art technology infrastructure which will accelerate the product development and reduce the induction time & the turnaround time for the futuristic systems development through its six sub-centres."

At the foundation laying ceremony, the Defence Minister said: "At the time of the DTTC’s inauguration, we had estimated an investment of ₹3,732 crore (500 mn USD) . Investment of more than ₹1,400 crore (200 mn USD) has already been received and the process is progressing rapidly."
 

Zapper

Experienced member
India Correspondent
Messages
1,657
Reactions
10 806
Nation of residence
United States of America
Nation of origin
India

The Brahmos-NG is smaller, lighter and has smarter dimensions and is being designed for deployment on a wider number of modern military platforms.

The Defence Research and Development Organisation (DRDO) is establishing a BrahMos manufacturing centre in Lucknow, the capital of Uttar Pradesh. The facility, on 200 acres, will manufacture the new Brahmos-NG (Next Generation) variant of the medium-range ramjet supersonic cruise missile that can be launched from submarine, ship, aircraft or land. It will be ready over the next two to three years and is expected to commence production at a rate of 80-100 Brahmos-NG missiles a year.

The manufacturing centre, announced by BrahMos Aerospace, will be a modern, state-of-art facility in the Lucknow node of the Uttar Pradesh Defence Industrial Corridor. The foundation stone for the centre, along with that for the Defence Technology and Test Centre (DTTC), was laid by Defence Minister Rajnath Singh on December 26.

The Brahmos-NG is smaller, lighter and has smarter dimensions and is being designed for deployment on a wider number of modern military platforms. It will hugely bolster the Indian military’s modern combat capability and flexibility during the next few years.

Commenting on the DTTC, a spokesperson for the Defence Ministry stated: "The first-of-its-kind Defence Technologies and Test Centre, spread over approximately 22 acres is being set up to accelerate the growth of the defence and aerospace manufacturing clusters in Uttar Pradesh Defence Industrial Corridor. It will consist of six sub-centres — Deep-Tech Innovation and Start up Incubation Centre, Design and Simulation Centre, Testing and Evaluation Centre, Centre for Industry 4.0/Digital Manufacturing, Skill Development Centre and a Business Development Centre."

The DTTC will follow the design-build-test-learn cycle for technology consultancy and hand-holding of deep-tech start-ups and industries. Explained the spokesperson: "The DTTC will facilitate industries through establishing a centralised state-of-the-art technology infrastructure which will accelerate the product development and reduce the induction time & the turnaround time for the futuristic systems development through its six sub-centres."

At the foundation laying ceremony, the Defence Minister said: "At the time of the DTTC’s inauguration, we had estimated an investment of ₹3,732 crore (500 mn USD) . Investment of more than ₹1,400 crore (200 mn USD) has already been received and the process is progressing rapidly."
Why not just give the production contract to L&T or the likes. Akash AAM and Pinaka are both being produced by private players and since Brahmos-NG will be fielded on all our fighter jets with good potential for exports, private firm is always the better choice with both higher rate of production and quality standards
 

Zapper

Experienced member
India Correspondent
Messages
1,657
Reactions
10 806
Nation of residence
United States of America
Nation of origin
India

Gary

Experienced member
Messages
7,727
Reactions
21 12,314
Nation of residence
Indonesia
Nation of origin
Indonesia
80-100 missile/yr is similar to the US usual order of 90 Tomahawk per lot.
 

Zapper

Experienced member
India Correspondent
Messages
1,657
Reactions
10 806
Nation of residence
United States of America
Nation of origin
India
It will be ready over the next two to three years and is expected to commence production at a rate of 80-100 Brahmos-NG missiles a year
An annual production rate of 80-100 Brahmos is too low if we're vying for exports as well...not to mention this will also arm pretty much every fighter jet in IAF's inventory and potentially arm the attack helos as well
 

Nilgiri

Experienced member
Moderator
Aviation Specialist
Messages
9,304
Reactions
96 18,875
Nation of residence
Canada
Nation of origin
India
80-100 missile/yr is similar to the US usual order of 90 Tomahawk per lot.

brahmos (regular or NG) is supersonic CM...brahmos 2 will be hypersonic

Subsonic Nirbhay is more the tomahawk equivalent.

Its numbers produced this decade (esp when MANIK engine matures and establishes) remains to be seen, but I would imagine it would be lot higher rate than brahmos family eventually.
 

Zapper

Experienced member
India Correspondent
Messages
1,657
Reactions
10 806
Nation of residence
United States of America
Nation of origin
India
Its numbers produced this decade (esp when MANIK engine matures and establishes) remains to be seen, but I would imagine it would be lot higher rate than brahmos family eventually
I believe Nirbhay is a tech demonstrator, not a production variant even though few missiles with the Russian Turbojet engine have been inducted into the forces. Even in the recent interview with ARDE's director, he mentioned that few more tests and evaluations will be needed with GTRE's MANIK engine after which they'll develop a production variant
 

Nilgiri

Experienced member
Moderator
Aviation Specialist
Messages
9,304
Reactions
96 18,875
Nation of residence
Canada
Nation of origin
India
I believe Nirbhay is a tech demonstrator, not a production variant even though few missiles with the Russian Turbojet engine have been inducted into the forces. Even in the recent interview with ARDE's director, he mentioned that few more tests and evaluations will be needed with GTRE's MANIK engine after which they'll develop a production variant

I just use nirbhay as placeholder name for whatever they end up calling the subsonic manik CM....the production variant as you call it.

They might as well just keep nirbhay for it.
 

Follow us on social media

Top Bottom