8x8 FNSS PARS (TURKEY)

T

Turko

Guest

1620124567450.png

PARS III 8x8​

PARS III 8X8 has been developed with a special emphasis on mobility, protection, payload, and growth potential. The vehicles are equipped with the latest designs and cutting edge technologies with a focus on the performance and durability of modern military operational requirements.


1620124599303.png




The PARS III 8X8 combat weight is 30,000 kg and is powered by a diesel engine. The powerpack consists of a water cooled diesel engine, coupled with a fully automatic transmission which generates a maximum road speed of up to 100 km/h. PARS III 8X8 is capable of maneuvering on a 60% vertical and 30% horizontal gradient, climbing 70 cm-high obstacles and crossing 200 cm-wide trenches. Thanks to the engine layout and favored balanced design, the vehicle has almost equal axle loads. This design approach gives the vehicle the ability to move comfortably even on loose and soft terrain, providing increased road-holding at high speeds and short braking distances. The vehicle has 8X8 driving characteristics, and all of its axles can be locked when necessary. The central tire inflation system allows the driver to adjust the tire pressures to suit different terrain conditions.
The fully independent hydro-pneumatic suspension system, which gives the vehicle the highest wheel travel of its class, and ensures the best road grip under different road conditions.
1620124634551.png



The PARS III 8X8 all-axle steering system gives the vehicle the lowest turning radius in its class at 8 m. The ability of gradual decreasing of steer by wire of rear axles and locking over certain speeds, together with the ABS system and the retarder contributes to enhanced driving safety.
The two-man driver’s cab at front of the vehicle offers a 180° horizontal field of vision and a high level of driving safety and comfort. Large glass periscopes, and front driving and maneuver cameras with thermal cameras located at the front and rear of the vehicle provide the driver and commander with a wider field of vision.

1620124656855.png

1620124681531.png

PARS III armament
The PARS III 8×8 vehicle can be armed with a range of armament such as a 25mm one-man SABER turret / 30mm two-man turret, a 12.7mm remote-controlled weapon station (RCWS), a 7.62mm / 12.7mm machine gun, and an 81mm / 120mm mortar system.
1620124766298.png



The SABER turret integrates a M242 25mm dual-feed automatic cannon and a M240 7.62mm coaxial machine gun mounted to the left of the main armament. A bank of three 76mm grenade launchers is also installed on either side of the turret towards the rear.
1620124843448.png

1620125161286.png

1620125211644.png

Screenshot_2021-05-04-13-31-59-604_com.android.chrome.jpg





 
Last edited by a moderator:

Follow us on social media

Top Bottom