Indonesia Indonesian Army,Tentara Nasional Indonesia-Angkatan Darat (TNI-AD)

NEKO

Experienced member
Indonesia Correspondent
Messages
2,836
Reactions
3 2,372
Nation of residence
Indonesia
Nation of origin
Indonesia
Not really, if you got some ninja Blade type of weaponry you can reduce the damage excess
But IMO high profile alutsista from US is problematic for both ID and US if it is used for internal problem in here.
Dilemma of using US made weaponry
>pros : made in US
>cons : made in US

There is also Turkey as a very possible supplier
Now this is less problematic.

This is what I got from wiki
View attachment 31153

Retracing the reference I got
View attachment 31154
View attachment 31155
Not bad, is it already entering production stage?
 

Madokafc

Experienced member
Think Tank Analyst
DefenceHub Diplomat
Messages
5,902
Reactions
4 10,019
Nation of residence
Indonesia
Nation of origin
Indonesia
I'm not sure. This somehow reminds me that we are outproduced by Hamas.
Not really, Hamas rocket doesn't comfort reliability and standard procedure for production and safety for the user itself.
 

wekiweko

Committed member
Messages
167
Reactions
188
Nation of residence
Barbados
Nation of origin
Barbados
wonder why the lack of mass use of RCWS, perhaps it's just another "padat karya" thing

I bet Thales Hawkei is a far superior product compared to Komodo, but then again always manage expectation by acknowledging the fact that as long as makelar driven acquisition is still being maintained, there's always a possibility that instead getting a better product than Komodo, we end up with gejeh stuff
 

Umigami

Experienced member
Moderator
Indonesia Moderator
Messages
5,915
Reactions
5 4,778
Nation of residence
Indonesia
Nation of origin
Indonesia
wonder why the lack of mass use of RCWS, perhaps it's just another "padat karya" thing

I bet Thales Hawkei is a far superior product compared to Komodo, but then again always manage expectation by acknowledging the fact that as long as makelar driven acquisition is still being maintained, there's always a possibility that instead getting a better product than Komodo, we end up with gejeh stuff
I don't think it's about padat karya.
Even RCWS need one operator just like mounted MG.
 

R4duga

Experienced member
Messages
1,669
Reactions
2 2,366
Nation of residence
Indonesia
Nation of origin
Indonesia
are we really developed it from scratch or feels like it was "upsized" version of other rifle ?

1631706156191.png


The Indonesian Army Research and Development Agency (Dislitbangad) tested the Anti-Materiel 20 mm Caliber Sniper Rifle Prototype as a result of the Research and Development activities of Dislitbangad in collaboration with PT Pindad (Persero) at the Pussenarmed Batujajar Shooting Range, West Bandung. Wednesday (15/9/2021).

The Head of the TNI AD Research and Development Service (Kadislitbangad) Brigadier General Terry Tresna Purnama., S.I.Kom., M.M, as Kagiat said that the trial of the 20 mm Anti-Materiel Sniper Rifle Prototype was the result of the Research and Development activities of the Dislitbangad in collaboration with PT. Pindad (Persero) is a Kal Sniper Rifle. 20 mm Anti Materiel which is used to shoot targets that are relatively far away with accurate aiming results as well as impact results that can immobilize/destroy targets.

The making of this prototype is based on the idea of creating a special rifle that can paralyze or destroy enemy war equipment on land targets such as Ranpur and Rantis and air targets, namely fixed-wing aircraft. In 2018 Dislitbangad cooperated with PT. Pindad through the Litbanghan program has succeeded in making the Kal Sniper Rifle Prototype. 20 mm Anti Materiel and in 2021 a trial will be carried out to obtain certification so that it can be used as information for further development. In the trial of the Anti-Materiel 20 mm caliber Sniper Rifle Prototype, the results of the Research and Development Research and Development activities should be adjusted to the Technical Specification Standard (SST) for the Kal Sniper Rifle Prototype. 20 mm Anti Materiel R & D results that have been determined which in general requirements, Standard Technical Specifications (SST) Sniper Rifle Prototype Kal. This 20 mm Anti-Materiel should guide the current implementation of trials/certifications.

"In order to obtain quality materiel, the Kal. 20 mm Anti-Materiel Sniper Rifle Prototype must meet general requirements which include scientific and technological requirements (rules). Aspects that must be considered in the general requirements are the economic aspect, the level of technology used, the ability of industry support in state and national logistical support capabilities. Although these requirements are qualitative in nature, the assessment is in the form of numbers (quantitative) whose boundaries have been clearly determined and must be used as one of the basic considerations in analyzing the results of the test results of the Kal 20 mm Anti Sniper Rifle Prototype The material aspects that become the general requirements are: Materials/components used in the manufacture or design of the Kal 20 mm Anti-Materiel Sniper Rifle Prototype as a result of this R&D come from domestic sources, have high economic value both in terms of procurement and during usage.Proto Sniper Rifle type Kal. 20 mm Anti Materiel during operation has a higher value (economical) compared to the price at the time of procurement, has high/advanced technology. Sniper Rifle Prototype Kal. 20 mm Anti Materiel must be the latest product using the latest/not outdated technology, easy to support and procure materiel. Sniper Rifle Prototype Kal. 20 mm Anti Materiel in the process of procuring spare parts must be fulfilled until the end of its useful life (Life of Time), has a relatively long service life. Sniper Rifle Prototype Kal. 20 mm Anti Materiel must be used for a minimum of 10 years," he said enthusiastically and inspiringly.

Furthermore, Kadislitbangad added that what needs to be considered in the tactical requirements of the Kal Sniper Rifle Prototype technical requirements. 20 mm Anti Materiel covers intelligence aspects, where security and confidentiality elements must be considered, from operational aspects, elements of use, mobilization, and maintenance must be easy because of the orientation of using the Kal Sniper Rifle Prototype. This 20 mm Anti Materiel is for special units. Apart from that, personnel aspects, comfort and security elements for user soldiers must also be prioritized, including from the logistical aspect of the supply and distribution elements, so that the tactical requirement is to have high shooting accuracy.

" The prototype of the Kal. 20 mm Anti Materiel Sniper Rifle can provide good shooting accuracy, resistant to environmental influences. The Kal. 20 mm Anti Materiel Sniper Rifle prototype can adapt to the surrounding environmental conditions, easy to carry, maintain and service. The prototype of the Sniper Rifle Cal. 20 mm Anti Materiel can be easily used by soldiers both in carrying, maintaining and when operating it is shock resistant. The prototype of the Kal. 20 mm Anti Materiel Sniper Rifle can withstand limited shocks when moving and due to light impacts during transport, easy to disassemble install without special tools. The prototype of the Cal. 20 mm Sniper Rifle Anti Materiel can be disassembled without using special tools

. Sniper Rifle Prototype Kal. 20 mm Anti Materiel can provide security when operated by soldiers, Has a relatively long effective range. Sniper Rifle Prototype Kal. The 20 mm Anti Materiel can still shoot targets with precision by using an optical sight attached to it," he concluded.

In the trial of the Anti-Material 20 mm Caliber Sniper Rifle Prototype as a result of the Research and Development Dislitbangad activity, the Cpl Major Test Team Edi Suwarno explained the implementation of the test with the following aspects, first, the construction and equipment aspects of the test material were the requirements for the Kal Sniper Rifle Prototype design requirements. 20 mm Anti Materiel such as weight, dimensions, type and others. Second, the test material for the ability aspect is a requirement that describes the use value of the material when it is used to carry out the unit's main tasks. Third, the test material for the Smooth Work aspect is a requirement related to the malfunction of the use of the Kal Sniper Rifle Prototype. 20 mm Anti Materiel both under normal conditions and extreme conditions such as resistance to weather and terrain influences as well as resistance to continuous use and limited rough treatment. Fourth, the Human Aspect test material, is a requirement related to the comfort and safety of user personnel when the material is brought in mobility or operationalized.

Attending the Trial of the Anti-Materiel 20 mm Caliber Sniper Rifle Prototype as a result of the Research and Development activities of the Dislitbangad, among others, Paban III/Litbangasro Srenaad, Paban IV/Binsisops Sopsad, Head of Sub-Directorate and Alutsista Sdirsen Pussenif Kodiklatad, Kopassus Ship, Kasubditbinjat Dispalad Headquarters, Kasubditbinjat Optronikad, The Experts in Dislitbangad Matter, Head of Subdismat Dislitbangad, Head of Dislitbangad and related Indhan Partners from PT. Pindad
 

FPXAllen

Contributor
Indonesia Correspondent
Messages
1,079
Reactions
4 1,605
Nation of residence
Indonesia
Nation of origin
Indonesia
are we really developed it from scratch or feels like it was "upsized" version of other rifle ?
At the very least, Pindad is able to produce the railing, stock, bipod, and the gun's casing though...
 

NEKO

Experienced member
Indonesia Correspondent
Messages
2,836
Reactions
3 2,372
Nation of residence
Indonesia
Nation of origin
Indonesia
IMG-20210915-WA0092.jpg

So its a bolt action single shot rifle (less complex).
The barrel must be from the overseas.

What is that guy at the back is holding some kind of metal tool.
Ada pentolan itemnya buat yang buat ngokang?
 

deadlast

Committed member
Professional
Messages
153
Reactions
2 350
Nation of residence
Indonesia
Nation of origin
Indonesia
are we really developed it from scratch or feels like it was "upsized" version of other rifle ?

View attachment 31200

The Indonesian Army Research and Development Agency (Dislitbangad) tested the Anti-Materiel 20 mm Caliber Sniper Rifle Prototype as a result of the Research and Development activities of Dislitbangad in collaboration with PT Pindad (Persero) at the Pussenarmed Batujajar Shooting Range, West Bandung. Wednesday (15/9/2021).

The Head of the TNI AD Research and Development Service (Kadislitbangad) Brigadier General Terry Tresna Purnama., S.I.Kom., M.M, as Kagiat said that the trial of the 20 mm Anti-Materiel Sniper Rifle Prototype was the result of the Research and Development activities of the Dislitbangad in collaboration with PT. Pindad (Persero) is a Kal Sniper Rifle. 20 mm Anti Materiel which is used to shoot targets that are relatively far away with accurate aiming results as well as impact results that can immobilize/destroy targets.

The making of this prototype is based on the idea of creating a special rifle that can paralyze or destroy enemy war equipment on land targets such as Ranpur and Rantis and air targets, namely fixed-wing aircraft. In 2018 Dislitbangad cooperated with PT. Pindad through the Litbanghan program has succeeded in making the Kal Sniper Rifle Prototype. 20 mm Anti Materiel and in 2021 a trial will be carried out to obtain certification so that it can be used as information for further development. In the trial of the Anti-Materiel 20 mm caliber Sniper Rifle Prototype, the results of the Research and Development Research and Development activities should be adjusted to the Technical Specification Standard (SST) for the Kal Sniper Rifle Prototype. 20 mm Anti Materiel R & D results that have been determined which in general requirements, Standard Technical Specifications (SST) Sniper Rifle Prototype Kal. This 20 mm Anti-Materiel should guide the current implementation of trials/certifications.

"In order to obtain quality materiel, the Kal. 20 mm Anti-Materiel Sniper Rifle Prototype must meet general requirements which include scientific and technological requirements (rules). Aspects that must be considered in the general requirements are the economic aspect, the level of technology used, the ability of industry support in state and national logistical support capabilities. Although these requirements are qualitative in nature, the assessment is in the form of numbers (quantitative) whose boundaries have been clearly determined and must be used as one of the basic considerations in analyzing the results of the test results of the Kal 20 mm Anti Sniper Rifle Prototype The material aspects that become the general requirements are: Materials/components used in the manufacture or design of the Kal 20 mm Anti-Materiel Sniper Rifle Prototype as a result of this R&D come from domestic sources, have high economic value both in terms of procurement and during usage.Proto Sniper Rifle type Kal. 20 mm Anti Materiel during operation has a higher value (economical) compared to the price at the time of procurement, has high/advanced technology. Sniper Rifle Prototype Kal. 20 mm Anti Materiel must be the latest product using the latest/not outdated technology, easy to support and procure materiel. Sniper Rifle Prototype Kal. 20 mm Anti Materiel in the process of procuring spare parts must be fulfilled until the end of its useful life (Life of Time), has a relatively long service life. Sniper Rifle Prototype Kal. 20 mm Anti Materiel must be used for a minimum of 10 years," he said enthusiastically and inspiringly.

Furthermore, Kadislitbangad added that what needs to be considered in the tactical requirements of the Kal Sniper Rifle Prototype technical requirements. 20 mm Anti Materiel covers intelligence aspects, where security and confidentiality elements must be considered, from operational aspects, elements of use, mobilization, and maintenance must be easy because of the orientation of using the Kal Sniper Rifle Prototype. This 20 mm Anti Materiel is for special units. Apart from that, personnel aspects, comfort and security elements for user soldiers must also be prioritized, including from the logistical aspect of the supply and distribution elements, so that the tactical requirement is to have high shooting accuracy.

" The prototype of the Kal. 20 mm Anti Materiel Sniper Rifle can provide good shooting accuracy, resistant to environmental influences. The Kal. 20 mm Anti Materiel Sniper Rifle prototype can adapt to the surrounding environmental conditions, easy to carry, maintain and service. The prototype of the Sniper Rifle Cal. 20 mm Anti Materiel can be easily used by soldiers both in carrying, maintaining and when operating it is shock resistant. The prototype of the Kal. 20 mm Anti Materiel Sniper Rifle can withstand limited shocks when moving and due to light impacts during transport, easy to disassemble install without special tools. The prototype of the Cal. 20 mm Sniper Rifle Anti Materiel can be disassembled without using special tools

. Sniper Rifle Prototype Kal. 20 mm Anti Materiel can provide security when operated by soldiers, Has a relatively long effective range. Sniper Rifle Prototype Kal. The 20 mm Anti Materiel can still shoot targets with precision by using an optical sight attached to it," he concluded.

In the trial of the Anti-Material 20 mm Caliber Sniper Rifle Prototype as a result of the Research and Development Dislitbangad activity, the Cpl Major Test Team Edi Suwarno explained the implementation of the test with the following aspects, first, the construction and equipment aspects of the test material were the requirements for the Kal Sniper Rifle Prototype design requirements. 20 mm Anti Materiel such as weight, dimensions, type and others. Second, the test material for the ability aspect is a requirement that describes the use value of the material when it is used to carry out the unit's main tasks. Third, the test material for the Smooth Work aspect is a requirement related to the malfunction of the use of the Kal Sniper Rifle Prototype. 20 mm Anti Materiel both under normal conditions and extreme conditions such as resistance to weather and terrain influences as well as resistance to continuous use and limited rough treatment. Fourth, the Human Aspect test material, is a requirement related to the comfort and safety of user personnel when the material is brought in mobility or operationalized.

Attending the Trial of the Anti-Materiel 20 mm Caliber Sniper Rifle Prototype as a result of the Research and Development activities of the Dislitbangad, among others, Paban III/Litbangasro Srenaad, Paban IV/Binsisops Sopsad, Head of Sub-Directorate and Alutsista Sdirsen Pussenif Kodiklatad, Kopassus Ship, Kasubditbinjat Dispalad Headquarters, Kasubditbinjat Optronikad, The Experts in Dislitbangad Matter, Head of Subdismat Dislitbangad, Head of Dislitbangad and related Indhan Partners from PT. Pindad
Upsized version of Pindad SPR-2 .50cal.
 

Van Kravchenko

Contributor
Indonesia Correspondent
Messages
1,285
Reactions
2 872
Nation of residence
Indonesia
Nation of origin
Indonesia
What is that guy at the back is holding some kind of metal tool.
It was the bolt, seems derived from Macmillan tac 50. Not sure what kind of catridge to use in this particular gun. There's vast variations of 20 mm wether full power or low power catridges. Hence the kick from that gun will be a benefit for masseur guy.

Edit : i just thought it was derived from zastava m93 black arrow bolt. But i remember that M93 resemble the fromt part of Mauser Kar 98k bolt and rear part of FNRF bolt.
 
Last edited:

Madokafc

Experienced member
Think Tank Analyst
DefenceHub Diplomat
Messages
5,902
Reactions
4 10,019
Nation of residence
Indonesia
Nation of origin
Indonesia
Reserve Components units (Komcad)

Pemberangkatan-Prajurit-Komcad-Kodam-Tanjungpura-200921-jhw-1.jpg

Pemberangkatan-Prajurit-Komcad-Kodam-Tanjungpura-200921-jhw-3.jpg

Pemberangkatan-Prajurit-Komcad-Kodam-Tanjungpura-200921-jhw-2.jpg


Sejumlah prajurit Komponen Cadangan (Komcad) Kodam XII/Tanjungpura mengikuti upacara pemberangkatan latihan pembulatan di Pelabuhan Dwikora, Pontianak, Kalimantan Barat, Senin (20/9/2021). Sebanyak 499 prajurit Komcad dari Kodam XII/Tanjungpura yang telah menjalani Latihan Dasar Militer (Latsarmil) selama tiga bulan di Mako Dodik Bela Negara Rindam XII/Tanjungpura tersebut diberangkatkan dengan menggunakan KM Kelimutu untuk menjalani latihan pembulatan di Pusdiklatpassus Kopassus Batujajar di Bandung, Jawa Barat. ANTARA FOTO/Jessica Helena Wuysang/rwa.
 

Van Kravchenko

Contributor
Indonesia Correspondent
Messages
1,285
Reactions
2 872
Nation of residence
Indonesia
Nation of origin
Indonesia
Reserve Components units (Komcad)

Pemberangkatan-Prajurit-Komcad-Kodam-Tanjungpura-200921-jhw-1.jpg

Pemberangkatan-Prajurit-Komcad-Kodam-Tanjungpura-200921-jhw-3.jpg

Pemberangkatan-Prajurit-Komcad-Kodam-Tanjungpura-200921-jhw-2.jpg


Sejumlah prajurit Komponen Cadangan (Komcad) Kodam XII/Tanjungpura mengikuti upacara pemberangkatan latihan pembulatan di Pelabuhan Dwikora, Pontianak, Kalimantan Barat, Senin (20/9/2021). Sebanyak 499 prajurit Komcad dari Kodam XII/Tanjungpura yang telah menjalani Latihan Dasar Militer (Latsarmil) selama tiga bulan di Mako Dodik Bela Negara Rindam XII/Tanjungpura tersebut diberangkatkan dengan menggunakan KM Kelimutu untuk menjalani latihan pembulatan di Pusdiklatpassus Kopassus Batujajar di Bandung, Jawa Barat. ANTARA FOTO/Jessica Helena Wuysang/rwa.
Ironically, this KOMCAD armed with compact SS2 wich is more reliable with Pincantiny installed than standard KODAM unit armament (even para raider).

I kinda like compact weapon, give more agillity.
 

Umigami

Experienced member
Moderator
Indonesia Moderator
Messages
5,915
Reactions
5 4,778
Nation of residence
Indonesia
Nation of origin
Indonesia
Quite surprising woody armor can protect M113 against this.

Can Anoa survive that?
 

Madokafc

Experienced member
Think Tank Analyst
DefenceHub Diplomat
Messages
5,902
Reactions
4 10,019
Nation of residence
Indonesia
Nation of origin
Indonesia
Quite surprising woody armor can protect M113 against this.

Can Anoa survive that?
My best bet is those are home Made RPG2 of Southern Philippines, if used against Anoa 2, Anoa 2 which already using additional plate armor can resist such attack
 

deadlast

Committed member
Professional
Messages
153
Reactions
2 350
Nation of residence
Indonesia
Nation of origin
Indonesia
Quite surprising woody armor can protect M113 against this.

Can Anoa survive that?
Against homemade RPG-2?

Bare naked standard Anoa? Unlikely.
Up-armored ceramic Anoa? Probably.
Anoa with add-on bar/anti-rpg armor? Yes.
 

R4duga

Experienced member
Messages
1,669
Reactions
2 2,366
Nation of residence
Indonesia
Nation of origin
Indonesia
Quite surprising woody armor can protect M113 against this.

Can Anoa survive that?
depends on what type of ammunition used, if it was shaped charge, i doubt anoa will survive , we don't have much information of what type of ammunition used on that m113, could be HE Fragmentation or something else.
 

Follow us on social media

Top Bottom