- Messages
- 7,776
- Reactions
- Nation of residence
-
- Nation of origin
-
Bangladesh News Primary Trainer | UAV | Other Projects
- Thread starter Isa Khan
- Start date
- Messages
- 5,036
- Reactions
- Nation of residence
-
- Nation of origin
-
Michael Corleone
Committed member
- Messages
- 156
- Reactions
- Nation of residence
-
- Nation of origin
-
gimmicky aircraft they took 15 years to make so not surprised
- Messages
- 7,776
- Reactions
- Nation of residence
-
- Nation of origin
-
The Bangladesh Air Force (BAF) is partnering with China to establish an unmanned aerial vehicle (UAV) or drone manufacturing plant in Bangladesh through a technology transfer agreement.
Officials expect the construction of the plant to be completed by December of this year, marking a major milestone in the country's defence industrial capability.
In a further development, China has also proposed setting up an aircraft overhauling facility in the country.
The information was revealed in the minutes of a coordination meeting held in September, chaired by Chowdhury Ashik Mahmud Bin Harun, executive chairman of the Bangladesh Investment Development Authority (Bida), a copy of which was seen by The Business Standard.
The Bida meeting primarily focused on establishing a specialised Defence Economic Zone and creating opportunities for local, private, and foreign investment to facilitate the domestic production of goods used by military and paramilitary forces.
An official from the BAF informed the meeting that the Bangladesh Aeronautical Research and Development Centre, established by the Air Force two years ago, had successfully designed and flown four aircraft. The initiative aimed to develop indigenous technology for training aircraft and subsequently move towards the commercial production of sport aircraft.
Air Force officials highlighted the significant global demand for aviation-related equipment. They suggested that coordinated efforts with universities to develop a skilled local workforce could significantly boost the aviation sector, thus increasing the potential for foreign investment.
Aircraft overhauling
Regarding China's aircraft overhauling proposal, an official told the meeting that by integrating certain equipment with the Air Force's existing capabilities and manpower, it would be possible to overhaul engines for used aircraft.
"As the same aircraft models and engines are popular in our neighbouring countries, securing foreign investment in this area will be comparatively easier," the official noted.
www.tbsnews.net
Officials expect the construction of the plant to be completed by December of this year, marking a major milestone in the country's defence industrial capability.
In a further development, China has also proposed setting up an aircraft overhauling facility in the country.
The information was revealed in the minutes of a coordination meeting held in September, chaired by Chowdhury Ashik Mahmud Bin Harun, executive chairman of the Bangladesh Investment Development Authority (Bida), a copy of which was seen by The Business Standard.
The Bida meeting primarily focused on establishing a specialised Defence Economic Zone and creating opportunities for local, private, and foreign investment to facilitate the domestic production of goods used by military and paramilitary forces.
An official from the BAF informed the meeting that the Bangladesh Aeronautical Research and Development Centre, established by the Air Force two years ago, had successfully designed and flown four aircraft. The initiative aimed to develop indigenous technology for training aircraft and subsequently move towards the commercial production of sport aircraft.
Air Force officials highlighted the significant global demand for aviation-related equipment. They suggested that coordinated efforts with universities to develop a skilled local workforce could significantly boost the aviation sector, thus increasing the potential for foreign investment.
Aircraft overhauling
Regarding China's aircraft overhauling proposal, an official told the meeting that by integrating certain equipment with the Air Force's existing capabilities and manpower, it would be possible to overhaul engines for used aircraft.
"As the same aircraft models and engines are popular in our neighbouring countries, securing foreign investment in this area will be comparatively easier," the official noted.
Bangladesh Air Force setting up drone manufacturing plant in JV with China
Construction expected to be completed by December
- Messages
- 7,776
- Reactions
- Nation of residence
-
- Nation of origin
-
Highlights:
- Bangladesh plans G-to-G deal with China for drone factory
- Finance ministry approved Tk608 crore UAV manufacturing project
- Bangladesh Air Force to implement project with Chinese CETC technology
- Project enables domestic drone manufacturing, reducing import dependence
- Payments spread over four years within existing Air Force budget
- Proposal approved with strict financial conditions and oversight
Bangladesh plans to sign a government-to-government (G-to-G) agreement with China to set up a military drone manufacturing facility, enhancing the country's air defence capabilities.
Ahead of the formal signing, the finance ministry on 6 January approved a project proposal – officially titled "Establishment of Manufacturing Plant and Transfer of Technology (ToT) for Unmanned Aerial Vehicles (UAVs)". The Tk608.08 crore project includes Tk570.60 crore for opening letters of credit (LCs) and making payments to import and install the plant and related technology, according to a copy of the proposal seen by The Business Standard.
Of the total amount, Tk570.60 crore will be disbursed over four fiscal years: Tk106 crore in the current year, Tk155 crore each in FY2026-27 and FY2027-28, and approximately Tk154.60 crore in FY2028-29.
The remaining Tk37.47 crore will be paid in local currency to cover LC opening charges, VAT and SWIFT charges.
When asked about it on Saturday, Finance Adviser Salehuddin Ahmed told TBS, "I will not comment on the establishment of a drone plant or the import of fighter jets."
When asked about the approval of the proposal to set up a drone plant and the import of ToT, he said, "There are many discussions about which country the fighter jets will be purchased from. Therefore, I will not talk about drones or fighter jets right now. Let everything be finalised first."
Bangladesh Air Force will implement the project with technology supplied by China Electronics Technology Group Corporation (CETC) International, a state-owned Chinese defence electronics conglomerate, according to the proposal.
The project is intended to enable the Bangladesh Air Force to manufacture and maintain drones domestically, a move officials say could reduce long-term reliance on imports.
When contacted, Aysha Siddiqua, assistant director of the ISPR, told this newspaper, "We do not have any information on this yet. We will be able to inform you once we receive any press release or information from the Air Force."
Before the finance ministry's approval, Chief Adviser Muhammad Yunus, who is also the adviser in charge of the defence ministry, approved the proposal.
Officials said the Bangladesh Air Force will not require any additional budget allocation to import the drone manufacturing plant and transfer of technology. The expenditure can be covered from the annual allocation under the "other machinery and equipment" head in the Air Force budget.
A joint committee formed by the armed forces had earlier given policy approval – following negotiations – to procure the drone manufacturing plant and ToT, with payments to be made over either the FY25 to FY28 period or the FY26 to FY29 period.
According to the minutes of a coordination meeting held in September 2025, chaired by Chowdhury Ashik Mahmud Bin Harun, executive chairman of the Bangladesh Investment Development Authority (Bida), the Bangladesh Air Force (BAF) is partnering with China to establish an unmanned aerial vehicle (UAV) or drone manufacturing plant in Bangladesh through a technology transfer agreement.
Multiple attempts by TBS to contact Bida's executive chairman, Chowdhury Ashik Mahmood Bin Harun, seeking information on the matter last Wednesday, were unsuccessful as he did not answer. He saw the question sent to him on WhatsApp regarding the issue, but did not respond.
Proposal approved on five conditions
The finance ministry approved the proposal, subject to five conditions. These include meeting the current fiscal year's expenditure from existing allocations, without seeking any additional budget for this procurement, according to the approved proposal.
From the next fiscal year to FY2028-29, the required funds must be managed within the Bangladesh Air Force's approved annual budget ceilings. All payments must comply with prevailing financial rules and be executed through letters of credit (LCs).
The ministry also stipulated that the approved funds cannot be used for any purpose other than the proposed contract.
China's state-owned CETC International initially quoted Tk643.61 crore, including shipping costs. However, after discussions between Bangladesh Air Force officials and representatives of the Chinese company in November, the contract value was renegotiated and reduced by Tk35.53 crore to Tk608.07 crore.
According to CETC International's website, the company is China's only large-scale technology corporation covering all areas of electronic information, including defence electronics, security electronics, and informatisation, with its products reaching more than 110 countries.
In defence electronics, CETC has developed seven main product systems: air base early warning, integrated electronic information systems, radar, communication and navigation, electronic warfare, UAV electronic equipment, and integrated IFF.
Its security and electronic information portfolio includes public security, e-government, intelligent transportation, new energy, components, and other related products and services.
Bangladesh to sign Tk608cr deal with China for military drone plant
The Tk608.08 crore project includes Tk570.60 crore for opening letters of credit (LCs) and making payments to import and install the plant and related technology
- Messages
- 5,036
- Reactions
- Nation of residence
-
- Nation of origin
-
This is big news. The land and facility development has been completed already as reported before.
সোর্স: The Business Standard https://share.google/TTXses2swicZWPnTN
Now CETC will ship the Turn-key production line to BD with this $50 millions deal. It can be considered fully finalised as ministry of finance has approved the budget. Which usually seen as the main roadblock even after many defence projects/procurements being approved by ministry of defence.
Keep in mind we are not getting ToT to assemble or partially manufacture specific platform like Wing Loong II.
This is ToT with a Turn-key production line from CETC. This would include 3D CNC machines, laser cutters, (well, BAF already has these two with BBT-2 Manufacturing) 3D printers, CMMs, testing system, specialized software tooling for design and development, potentially PCB printers and SMT machines (that would indicate local customisation of avionic assemblies like flight computer and mission computer instead of using COTS computers only.) and various other systems. Which would enable BAF to design, develop and manufacture different types of UAV. I.e. MALE or smaller medium range medium endurance ISR UAVs like existing KX-2 prototype.
As well as more smaller tactical cost effective attritable systems like Ukrainian Shark.
Potentially, loitering ammunitions down the line.
BAF has a team that gained experience over the years from KX-2 project working with limited facility and tooling. Now they can utilise it much better with these newly acquired sophisticated technologies from CETC and evolve their design and development processes.
সোর্স: The Business Standard https://share.google/TTXses2swicZWPnTN
Now CETC will ship the Turn-key production line to BD with this $50 millions deal. It can be considered fully finalised as ministry of finance has approved the budget. Which usually seen as the main roadblock even after many defence projects/procurements being approved by ministry of defence.
Keep in mind we are not getting ToT to assemble or partially manufacture specific platform like Wing Loong II.
This is ToT with a Turn-key production line from CETC. This would include 3D CNC machines, laser cutters, (well, BAF already has these two with BBT-2 Manufacturing) 3D printers, CMMs, testing system, specialized software tooling for design and development, potentially PCB printers and SMT machines (that would indicate local customisation of avionic assemblies like flight computer and mission computer instead of using COTS computers only.) and various other systems. Which would enable BAF to design, develop and manufacture different types of UAV. I.e. MALE or smaller medium range medium endurance ISR UAVs like existing KX-2 prototype.
As well as more smaller tactical cost effective attritable systems like Ukrainian Shark.
Potentially, loitering ammunitions down the line.
BAF has a team that gained experience over the years from KX-2 project working with limited facility and tooling. Now they can utilise it much better with these newly acquired sophisticated technologies from CETC and evolve their design and development processes.
- Messages
- 7,776
- Reactions
- Nation of residence
-
- Nation of origin
-
View attachment 79006
Highlights:
- Bangladesh plans G-to-G deal with China for drone factory
- Finance ministry approved Tk608 crore UAV manufacturing project
- Bangladesh Air Force to implement project with Chinese CETC technology
- Project enables domestic drone manufacturing, reducing import dependence
- Payments spread over four years within existing Air Force budget
- Proposal approved with strict financial conditions and oversight
Bangladesh plans to sign a government-to-government (G-to-G) agreement with China to set up a military drone manufacturing facility, enhancing the country's air defence capabilities.
Ahead of the formal signing, the finance ministry on 6 January approved a project proposal – officially titled "Establishment of Manufacturing Plant and Transfer of Technology (ToT) for Unmanned Aerial Vehicles (UAVs)". The Tk608.08 crore project includes Tk570.60 crore for opening letters of credit (LCs) and making payments to import and install the plant and related technology, according to a copy of the proposal seen by The Business Standard.
Of the total amount, Tk570.60 crore will be disbursed over four fiscal years: Tk106 crore in the current year, Tk155 crore each in FY2026-27 and FY2027-28, and approximately Tk154.60 crore in FY2028-29.
The remaining Tk37.47 crore will be paid in local currency to cover LC opening charges, VAT and SWIFT charges.
When asked about it on Saturday, Finance Adviser Salehuddin Ahmed told TBS, "I will not comment on the establishment of a drone plant or the import of fighter jets."
When asked about the approval of the proposal to set up a drone plant and the import of ToT, he said, "There are many discussions about which country the fighter jets will be purchased from. Therefore, I will not talk about drones or fighter jets right now. Let everything be finalised first."
Bangladesh Air Force will implement the project with technology supplied by China Electronics Technology Group Corporation (CETC) International, a state-owned Chinese defence electronics conglomerate, according to the proposal.
The project is intended to enable the Bangladesh Air Force to manufacture and maintain drones domestically, a move officials say could reduce long-term reliance on imports.
When contacted, Aysha Siddiqua, assistant director of the ISPR, told this newspaper, "We do not have any information on this yet. We will be able to inform you once we receive any press release or information from the Air Force."
Before the finance ministry's approval, Chief Adviser Muhammad Yunus, who is also the adviser in charge of the defence ministry, approved the proposal.
Officials said the Bangladesh Air Force will not require any additional budget allocation to import the drone manufacturing plant and transfer of technology. The expenditure can be covered from the annual allocation under the "other machinery and equipment" head in the Air Force budget.
A joint committee formed by the armed forces had earlier given policy approval – following negotiations – to procure the drone manufacturing plant and ToT, with payments to be made over either the FY25 to FY28 period or the FY26 to FY29 period.
According to the minutes of a coordination meeting held in September 2025, chaired by Chowdhury Ashik Mahmud Bin Harun, executive chairman of the Bangladesh Investment Development Authority (Bida), the Bangladesh Air Force (BAF) is partnering with China to establish an unmanned aerial vehicle (UAV) or drone manufacturing plant in Bangladesh through a technology transfer agreement.
Multiple attempts by TBS to contact Bida's executive chairman, Chowdhury Ashik Mahmood Bin Harun, seeking information on the matter last Wednesday, were unsuccessful as he did not answer. He saw the question sent to him on WhatsApp regarding the issue, but did not respond.
Proposal approved on five conditions
The finance ministry approved the proposal, subject to five conditions. These include meeting the current fiscal year's expenditure from existing allocations, without seeking any additional budget for this procurement, according to the approved proposal.
From the next fiscal year to FY2028-29, the required funds must be managed within the Bangladesh Air Force's approved annual budget ceilings. All payments must comply with prevailing financial rules and be executed through letters of credit (LCs).
The ministry also stipulated that the approved funds cannot be used for any purpose other than the proposed contract.
China's state-owned CETC International initially quoted Tk643.61 crore, including shipping costs. However, after discussions between Bangladesh Air Force officials and representatives of the Chinese company in November, the contract value was renegotiated and reduced by Tk35.53 crore to Tk608.07 crore.
According to CETC International's website, the company is China's only large-scale technology corporation covering all areas of electronic information, including defence electronics, security electronics, and informatisation, with its products reaching more than 110 countries.
In defence electronics, CETC has developed seven main product systems: air base early warning, integrated electronic information systems, radar, communication and navigation, electronic warfare, UAV electronic equipment, and integrated IFF.
Its security and electronic information portfolio includes public security, e-government, intelligent transportation, new energy, components, and other related products and services.
Bangladesh to sign Tk608cr deal with China for military drone plant
The Tk608.08 crore project includes Tk570.60 crore for opening letters of credit (LCs) and making payments to import and install the plant and related technology
@TR_123456 don't sue us.
A scale model of the XY-I was unveiled by the Chinese company CETC (China Electronics Technology Group Corporation) using the design of the Turkish-made Bayraktar TB2 UAS (Unmanned Aerial System). Citing information published by CETC, the XY-I is a medium-sized multi-purpose drone that has full autonomous flight capabilities and all-day long endurance.
The CETC XY-I is designed to be used for dual-purpose tasks in military or civilian sectors. It can perform missions such as reconnaissance, surveillance, border patrol, electronic warfare, communication, and attack roles.
Like the Turkish-made Bayraktar TB2, the CETC XY-I has a blended wing body design with an inverted V-tail structure. The engine compartment of the XY-I is a little different from the Bayraktar TB2. It has a two-blade propeller in a pusher configuration.
The CETC XY-I can be equipped with a wide range of payloads that can quickly and easily be changed according to the mission requirements. It can be fitted with electro-optical platform, reconnaissance, and communication systems as well as weapons including bombs and air-to-surface missiles.
Regarding the technical specifications of the XY-I, the Chinese company CETC did not disclose any information.
CETC from China develops its XY-I drone using Turkish Bayraktar TB2 UA
At AirShow China 2022, China Electronics Technology Group Corporation (CETC) unveils its new XY-I UAV (Unmanned Aerial Vehicle) which has a design similar
www.armyrecognition.com
- Messages
- 6,018
- Reactions
- Nation of residence
-
- Nation of origin
-
This is a good first step for Bangladesh,start with manufacturing and go from there.@TR_123456 don't sue us.
View attachment 79068
A scale model of the XY-I was unveiled by the Chinese company CETC (China Electronics Technology Group Corporation) using the design of the Turkish-made Bayraktar TB2 UAS (Unmanned Aerial System). Citing information published by CETC, the XY-I is a medium-sized multi-purpose drone that has full autonomous flight capabilities and all-day long endurance.
The CETC XY-I is designed to be used for dual-purpose tasks in military or civilian sectors. It can perform missions such as reconnaissance, surveillance, border patrol, electronic warfare, communication, and attack roles.
Like the Turkish-made Bayraktar TB2, the CETC XY-I has a blended wing body design with an inverted V-tail structure. The engine compartment of the XY-I is a little different from the Bayraktar TB2. It has a two-blade propeller in a pusher configuration.
The CETC XY-I can be equipped with a wide range of payloads that can quickly and easily be changed according to the mission requirements. It can be fitted with electro-optical platform, reconnaissance, and communication systems as well as weapons including bombs and air-to-surface missiles.
Regarding the technical specifications of the XY-I, the Chinese company CETC did not disclose any information.
CETC from China develops its XY-I drone using Turkish Bayraktar TB2 UA
At AirShow China 2022, China Electronics Technology Group Corporation (CETC) unveils its new XY-I UAV (Unmanned Aerial Vehicle) which has a design similar
Btw,that design is not exclusive,Ukraine an Russia have the same design.
