Installation of a mechanized bridge by an engineering machine TMM-3M2 of Russia. The TMM-3M2 engineering vehicle on the KAMAZ-53501 chassis was first shown in 2016, the vehicle replaced the Ukrainian TMM-3 vehicle on the KrAZ-255B chassis. The main difference between TMM-3M2 and its predecessors is the use of a hydraulic winch for assembly and disassembly of the bridge, which allows to increase the speed of opening, folding and lowering the bridge block in a larger range. The new car is equipped with rear-view cameras to monitor the laying of the bridge spans. The TM3 M2 machine can create bridge crossings up to 40 meters and a depth of up to 3.5 meters in order to pass wheeled and tracked vehicles through them. The carrying capacity of the bridges is 60 tons, the length of a link of four bridges is 42 meters, the assembly time of four span bridges is no more than 40 minutes.