The Russian Titan armored vehicle, developed by Remdizel specialists, is undergoing the final stage of state testing. soon the cars will go to the troops. Titan armored vehicles are a development of the Typhoon family of armored vehicles, also developed by Remdizel, we previously talked about them, the link to the video is in the comments to the video. Unlike the base vehicle, Titan is produced only with Russian components. The vehicle's armor is the same as that of the Typhoon armored car and provides protection against 7.62 mm caliber bullets, fragments of 155 mm shells and an explosion of 6 kg of TNT under the wheel or 4 kg under the bottom. The Titan armored vehicle is equipped with a Spica combat module, with a 2A42 cannon with 300 rounds, a 7.62 mm machine gun with 1000 rounds and 2 Konkurs-M anti-tank guided missiles with a firing range of up to 4 kilometers. It is possible to install foreign combat modules. The vehicle weighs 15 tons, the load capacity is 1420 kg, and the vehicle has a fairly large cargo compartment. Under the hood of the Titan is a 350-horsepower engine, allowing the armored car to accelerate along the highway to 100 kilometers per hour and overcome a ford 1.75 meters deep. The crew of the vehicle is 2 people and up to 6 equipped soldiers. The price of the Titan armored car has not yet been announced.
- Why the US and UK are facing a military recruitment crisis?
- Algeria Algerian Economy - Industries & Other Infrastructure
- Space Turkic States to launch joint satellites
- Poland Poland got approved to buy 360 Advanced Anti-Radiation GuidedMissile-Extended Range (AARGM-ER)
- Ukraine Ukrainian mechanics have mastered the repair of US M777 howitzers.
Russia Land Forces and Vehicles Programs
- Thread starter Ghost soldier
- Start date
The commander of the Russian tank support combat vehicle "Terminator" showed how it works at the training ground. These are the first shots showing how the Terminator BMPT is structured inside and the operation of its guidance systems.
The Russian Arena-M active protection complex will be improved, General Designer Valery Kashin announced this to the Russian Minister of Defense. The Arena-M complex for protecting tanks from ATGMs and shells will be equipped on T-72, T-80 and T-90 tanks, and possibly on the Terminator BMPT. The Arena-M complex will also have the function of protecting the tank from drones, since this is now the main threat to tanks. It is not reported how this will be done; most likely there will be a new radar. The Russian active protection complex "Arena-M" was tested back in 2021, it was tested on Russian and foreign ammunition, it is worth noting that it was never installed on tanks. The Arena-M active protection system is similar to the Israeli Trophy tank protection system from Rafael Advanced Defense Systems Ltd., which is installed on the Merkava Mark IV and M1A2C Abrams tanks. The Arena-M complex consists of a radar, an on-board computer, a console and blocks of protective ammunition in installation shafts. The Arena-M complex, with the help of a radar, detects a missile or projectile flying at a tank, after which it gives the command to neutralize it. To do this, narrowly targeted ammunition placed along the perimeter of the tower is fired towards the missile. The complex detects targets at a distance of up to 50 meters and fires defensive ammunition in 0.07 seconds. Each defensive ammunition fires at its own sector around the tank. The use of the Arena-M complex makes it possible to approximately double the survivability of a tank during offensive operations.
Russian President Vladimir Putin visited Uralvagonzavod in Nizhny Tagil, which produces Russian armored vehicles. The head of state got acquainted with the production process of armored vehicles and talked with plant employees. The video shows the T-72BZM and T-90M Proryv tanks ready to be sent to the troops. Judging by the video, special attention was paid to the Terminator tank support combat vehicle. Reportedly, a new workshop for the production of transmissions for military equipment, modern machine tools, as well as samples of finished products were shown. Among other things, the head of state inspected the area preparing equipment for run and firing tests, while work in the workshop did not stop, installation of systems and equipment continued. Uralvagonzavod is the main plant producing tanks for the Russian army. These include the T-14 on the Armata platform, the modernized T-72BZM tank and the T-90 Proryv.
Footage of the work of the Russian single-bucket military excavator EOV-3523, produced by the EKSMASH company, put into service in 2012. The EOV-3523 military excavator is designed for mechanization of excavation and loading work when equipping positions, areas where troops are located and areas where command posts are deployed. The EOV-3523 excavator is located on the KAMAZ-KAMAZ-53501 chassis and has better characteristics in comparison with the existing EOV 3521M excavator. The excavator is equipped with an air conditioning system and has a system to protect the chassis cabin from damage due to erroneous actions of the excavator operator during installation of working equipment. The excavator uses a hydraulic system from the German company Bosch Rexroht and can be equipped with replaceable working equipment intended for other work. The volume of the excavator bucket is 0.8 cubic meters, the maximum digging depth is 5 meters, the digging height is 8.6 meters, the soil unloading height is 6.1 meters, the digging radius is 8.5 meters. The weight of the excavator is 18.8 tons.
Delivery and storage of fuel in field storage facilities of the Russian Army. Personnel of the work of units of the fuel logistics service of the Russian Army. The video shows the delivery and transfer of fuel to field storage facilities of the Russian army. Fuel is transported by railway tanks; upon arrival at the station, the presence and serviceability of seals on the railway tanks are checked, after which samples of petroleum products are taken. A fuel sample is taken in each tank, from the bottom, top and middle of the tank. After the laboratory concludes that the quality of the fuel meets the established standards, the fuel is drained.
Loading devices are connected and fuel is pumped into polymer elastic tanks of the field warehouse. Polymer tanks are very convenient; they can be quickly camouflaged and placed on any area of the terrain. The polymer tank is highly durable and has a capacity of 50 cubic meters. Next, the fuel arrives at a stationary warehouse, from where tankers deliver it to the units. Vehicles intended for refueling and transporting fuel are camouflaged and additionally armored.
Loading devices are connected and fuel is pumped into polymer elastic tanks of the field warehouse. Polymer tanks are very convenient; they can be quickly camouflaged and placed on any area of the terrain. The polymer tank is highly durable and has a capacity of 50 cubic meters. Next, the fuel arrives at a stationary warehouse, from where tankers deliver it to the units. Vehicles intended for refueling and transporting fuel are camouflaged and additionally armored.
A new batch of BMP-3 manufactured in 2024 was sent by Kurganmashzavod to the Russian troops. Quite often they ask why the BMP-3 does not have protection. According to the company, additional protection kits, anti-cumulative grilles and armored screens, are supplied to the customer as separate products and are installed on the equipment upon the arrival of the combat vehicles at the unit. Now the number of Russian BMP-3s transferred to the army since the beginning of this year is one and a half times greater than the volumes of the same period in 2023.
The Rhythm-Flight biostimulation complex, designed for quick rest for soldiers, has been introduced in Russia. The complex was developed by engineers of the Nizhny Novgorod NPP Polet and was previously used for civilian purposes and for the quick recovery of military pilots. The “Rhythm-Flight” complex is quite an interesting device and can be useful to many people. According to the developers, the Rhythm-Flight device allows you to achieve deep relaxation of the body in a 20-minute session, comparable to 4–6 hours of sleep. The device, using programmable light and sound effects, normalizes a person’s emotional state, relieves nervous tension and fatigue, increases resistance to stress, prevents fatigue, increases vitality and performance. The “RITHM-FLIGHT” device consists of a mask with a screen transmitting special light signals, headphones, and a remote control for controlling the time and procedure mode. The cost of the RITM-POLET device is about 54 thousand rubles or 580 dollars.
Footage of firing of a Russian BMD-2 armored vehicle, the work of a unit of Pskov paratroopers. The BMD-2 fires from a 30 mm 2A42 automatic cannon, the gun's rate of fire is up to 800 rounds per minute, the range of destruction of enemy personnel is up to 4000 meters, lightly armored vehicles up to 1500 and air targets up to 2000 meters. The gun barrel length is 2400 mm, 80 calibers, the gun uses 30x165 mm shells, the gun life is up to 9000 rounds. The 2A42 automatic cannon has been produced at Tulmashzavod since 1980 and is installed on various armored vehicles, including helicopters. A non-licensed copy of the gun is also produced in Ukraine under the symbol ZTM-2.
Russian sappers demonstrated a method for remote mining of terrain with POM-2 anti-personnel mines using an RPG-7 grenade launcher. Sappers screw a mine onto a powder engine from a rocket-propelled grenade for an RPG-7 and mine at a range of up to 2 kilometers. The POM-2 family of mines includes several ammunition, the mass of the mine is 1500 grams, the amount of explosive is 140 grams, the radius of continuous destruction is 16 meters. This method allows sappers to safely carry out mining without entering the line of fire
During the visit of the Russian Minister of Defense to defense industry enterprises in the Tula region, the new Russian bicaliber MLRS "Vozrozhdenie" was first noticed at NPO "Splav". Footage of the real installation appeared for the first time. Judging by the video, it is possible that the Vozrozhdenie MLRS will be an exact copy of the Russian mining vehicle "Agriculture", they will simply change the package with missiles, as shown in the video. Since visually it is a copy of the “Agriculture” mining machine, more details about it can be found in the link to the video in the comments to the video. The developed MLRS "Vozrozhdenie" will possibly reduce the number of platforms with MLRS in the Russian army, and the creation of this vehicle will also speed up the reloading of the MLRS. It is assumed that the new MLRS will be able to use 120 and 220 mm projectiles from the TOS-1A, TOS-2 flamethrower systems, the Uragan MLRS, the Grad MLRS and the Agricultural remote mining vehicle. As you can see in the video, the production of the Vozrozhdenie bicaliber MLRS was quickly mastered and there are already ready-made combat vehicles.
The Russian army will begin testing the modified Zubilo unmanned armored vehicle in April. Reportedly, the unmanned armored vehicle was modified based on the wishes of the Russian Ministry of Defense. Among the key improvements, weight reduction and increased cross-country ability probably increased autonomy, since this parameter did not suit the military. The Remdiesel unmanned armored vehicle was first presented in 2023 and is designed to support assault groups, transport ammunition, transport cargo and the wounded, as well as recharge radio stations and drones. The armored unmanned platform "Zibilo" was created on the chassis of a serial KamAZ truck; it got its name from the shape of the hull. For the first time it was shown with a ZU-23-2 anti-aircraft gun as a weapon, but whether this will be its standard weapon is still unknown. The armored vehicle can quickly begin to be mass-produced, since it is created from available serial components. The Zubilo armored car is equipped with a 350 hp engine. has a curb weight of 13,300 kg and a load capacity of 2,700 kg, a maximum highway speed of 100 km/h, and a climbing angle of at least 30°.
Footage of exercises with the Russian armored train "Yenisei". It is worth noting that it can only be called an armored train conditionally; its main function is engineering reconnaissance, transportation of materials and restoration and protection of railway tracks. On the armored train on the platform, a BMP-2 infantry fighting vehicle is installed, there are crews of 82-mm mortars, anti-aircraft and tank machine guns. Military personnel also use drones.
Footage of the use of the Russian TDA-2K machine, intended for setting up smoke screens; we previously talked about the TDA-2M thermal smoke machine. The TDM-2K thermal smoke machine is manufactured by the Tambovpolimermash company and put into service in 1982. TDA-2K is located on the chassis of a KAMAZ-4310 vehicle and is intended for camouflage of various objects with neutral aerosols, as well as for disinfestation of areas and structures with insecticidal aerosols. The operating principle of the machine is based on the evaporation of a safe smoke-forming substance in a stream of hot gases, followed by condensation of the resulting vapors in the atmosphere. The vehicle deploys in 5 minutes and is capable of placing a smoke screen at a distance of at least 1000 meters for 4 to 13 hours on a single charge, doing this while moving at speeds of up to 40 km/h. The working volume of the aerosol-forming substance tank is 4200 liters. The crew of the car is 2 people.
Russian KamAZ-5350 (6x6) trucks began to be equipped with additional armor designed to protect against drones. It is not yet known to what extent the kits are being mass produced, but they are already being supplied to the troops. In addition, the troops began to receive KamAZ-6350 (8x8) trucks with factory armored cabs of the 2nd protection class. The total weight of the armor set for the KamAZ-5350 truck is 750 kilograms, the armor is placed on the outer and inner parts of the cab, gas tank and engine. The armor is combined and contains Kevlar sheets. The armor class is not reported.
Russian repair units have published an episode of the installation of a turret with a 30-mm 2A72 cannon from a Russian BTR-82A armored personnel carrier on a Ukrainian abandoned BWP-1 infantry fighting vehicle. The BWP-1 infantry fighting vehicle is a Polish copy of the Soviet BMP-1 infantry fighting vehicle, it was produced since 1967 and was subsequently modernized. Ukraine received about a hundred of these machines from Poland.
Footage of the operation of the Russian military mobile field bathhouse PPB-32VU. The PPB-32 VU mobile field bathhouse entered service with the troops in 2022 and is placed on the chassis of the Ural 532362 truck; the Kamaz 6350 PPB-32VK truck can also be used. The field bathhouse was manufactured by the Vyazemsky Machine-Building Plant and is intended for washing military personnel in the field outside their permanent deployment points. The field bath consists of several compartments, a dressing room, a washing compartment, an aggregate compartment with a diesel and heating unit, a boiler compartment and compartments for storing clean and dirty linen. Detailed technical information on the screen. The PPB-32 VU field bathhouse in the basic configuration allows 32 military personnel to wash themselves within an hour, the water consumption per person is 10 liters, the water supply in the bathhouse is 5000 liters. The sauna can be deployed in 90 minutes in winter and an hour in summer and can operate for 8 hours without refueling. The bathhouse is serviced by 2 people.
The Russian remote-controlled combat module "Dym-2" was proposed to be installed on armored vehicles to protect them from drones. Alexander Rogatkin reported this. The Dym-2 robotic combat module was first reported in 2020; it was developed by the ALFA-PRIBOR company and is intended to protect the launch positions of Yars ballistic missiles. The robot guard can work according to operator commands or act fully automatically. It is proposed to additionally equip the Dym-2 combat modules with radars and install them on armored personnel carriers; how this could be implemented is not reported. The module is large enough, it is more convenient to use it for guarding objects or protecting ships. The controlled combat module "Dym-2" is equipped with a camera, thermal imaging sight, loudspeaker and monitor. Armament, 8 salvo blocks, each block contains 10 machine gun barrels of 5.45 caliber, the rubber plug is knocked down by the first blank cartridge when fired. The installation also has 12 guides for grenade launchers. Typically, the combat module "Dym-2" is used to protect objects of the highest category.
The crew of the Russian T-72B tank showed homemade protection against drones. Currently, there is no full-fledged factory protection of Russian tanks from drones; the rear part of the tanks is especially vulnerable, so tank crews are forced to install the protection themselves. The tank's turret does not rotate, since it is designed to operate from indirect firing positions, like an artillery mount.
A Russian mechanic shared his impressions of the first captured Ukrainian infantry fighting vehicle, Marder 1A3, made in Germany. The Marder infantry fighting vehicle was adopted by Germany in 1971, Ukraine received the Marder 1A3 infantry fighting vehicle, this is a modification from 1989, with increased armor by 1600 kg, technical information about it is on the channel. According to the mechanic, due to the lack of lugs on the tracks, instead of them there are rubber pads, as well as the weight, the Marder 1A3 infantry fighting vehicle is suitable for use only on hard-surfaced soils.
