TR TF-X KAAN Fighter Jet

Fatman17

Well-known member
Messages
315
Reactions
9 685
Nation of residence
Pakistan
Nation of origin
Pakistan

TURKEY’S FIRST FIFTH-GEN KAAN FIGHTER TAKES FLIGHT​

  1. Turkey’s first fifth-gen Kaan fighter takes flight


By Cem Dogut 27th February 2024
NEWS
Turkey’s first domestically developed manned combat aircraft – which is now dubbed the Kaan (formerly known as the TF-X) – graced the skies for the first time on February 21, when it completed its maiden flight from Akinci Air Base near Ankara.
Barbaros Demirbaş, a test pilot working for Turkish Aerospace Industries (TUSAŞ), was in the cockpit of the Kaan prototype when the domestically produced fifth-generation fighter took off from Akinci for its maiden flight on February 21. The new fighter was accompanied by a Turkish Air Force (TuAF)-operated F-16D Fighting Falcon, which served as a chase aircraft for the Kaan’s first test sortie.
According to initial reports, the Kaan prototype was airborne for 13 minutes, reaching a height of 8,000ft and a speed of 230kts. For the test flight, the faceted enclosures for what appears to be both a dedicated infrared search-and-track (IRST) sensor system in front of the cockpit and a multi-purpose electro-optical targeting system (EOTS) underneath the forward fuselage have been removed.
With Barbaros Demirbaş, a TUSAŞ test pilot, at the controls, Turkey's first Kaan prototype (GTU/P0) got airborne for the first time at Akinci Air Base, near Ankara, on February 21, 2023. Note that the areas that would house the fifth-generation fighter's IRST sensor system (in front of the cockpit) and EOTS targeting system (underneath the forward fuselage) were covered up for this initial test sortie.
With Barbaros Demirbaş, a TUSAŞ test pilot, at the controls, Turkey's first Kaan prototype (GTU/P0) got airborne for the first time at Akinci Air Base, near Ankara, on February 21, 2023. Note that the areas that would house the fifth-generation fighter's IRST sensor system (in front of the cockpit) and EOTS targeting system (underneath the forward fuselage) were covered up for this initial test sortie. TUSAŞ
In order to meet TuAF requirements beyond 2030, the Milli Muharip Uçak (MMU; National Combat Aircraft) development programme was launched on December 15, 2010. The MMU project aimed to deliver an indigenously developed fifth-generation air superiority fighter with a secondary ground attack capability that could meet the operational requirements of the TuAF from 2030 to 2070. Now formally known as the Kaan, the MMU is being developed by TUSAŞ (serving as the programme’s prime contractor) as a proposed single-seat, twin-engine, all-weather multi-role fighter.
Over the course of the MMU programme, new capabilities and equipment will be added to the aircraft under a ‘Block Development Approach’, and in each Block, the ratio of locally produced content will increase. The Block 0, Block 10 (2029) and Block 20 (2032) aircraft will be powered by GE Aviation’s F110-GE-129E afterburning turbofan engines, while the jets produced in the Block 30 (2035) batch and beyond will gain the type’s true fifth-generation capabilities, following the integration of indigenously developed 35,000lbf-class afterburning turbofan engines that feature stealthy exhaust nozzles for low-observability.
With plans to perform its maiden flight in 2033 and to be inducted into TuAF service from 2035, the fifth-generation Block 30 model will have the capability to perform full air-to-air and air-to-ground combat missions. It will also benefit from an increased share of locally produced content thanks to its indigenously developed turbofan engines, subsystems and avionics.
In total, eight Kaan prototypes will be manufactured. According to Temel Kotil, President and CEO of TUSAŞ, the first seven MMU prototypes will be powered by GE’s F110-GE-129E turbofans, with the eighth set to be driven by the as-yet undefined domestically developed 35,000lbf-class engine. As well as the seven GE-powered prototypes, the initial series production batches of the Kaan will be powered by a pair of F110-GE-129E turbofans, which each generate 29,500lbf.
TUSAŞ first introduced the world to 'Kaan' when it publicly rolled out Turkey's initial MMU prototype (dubbed GTU/P0) during a ceremony in Ankara on May 1, 2023.
TUSAŞ first introduced the world to 'Kaan' when it publicly rolled out Turkey's initial MMU prototype (dubbed GTU/P0) during a ceremony in Ankara on May 1, 2023. Cem Dogut
TUSAŞ has previously announced that the deliveries of the first batch of 20 Kaans to the TuAF will be completed in 2034. In time, TUSAŞ will gain the ability to manufacture two Kaans per month and a total of 24 aircraft per year. TUSAŞ is carrying out the production and final assembly of its Kaan prototypes at the MMU Assembly and Test Building Block A (MMU Hangar); the construction of which was completed in March 2022.
The firm started assembling the first Kaan prototype at the MMU Hangar on April 30, 2022, and the Development Test Aircraft – abbreviated as GTU in Turkish and also called ‘Prototype 0 (P0)’ – was moved to the final assembly line on November 21, that year. TUSAŞ held a Defense Industry Press Conference at the Kahramankazan Campus in Ankara on January 11, 2023, where officials first unveiled the GTU/P0 prototype to the defense/aerospace media representatives in attendance.
The GTU/P0 prototype performed its first engine run-up test with its F110-GE-129E turbofans at the Outdoor Engine Test Field – located next to the MMU Assembly and Test Building – on February 21, 2023. With this, ground trials were launched. The MMU (or TF-X as it was also known) was formally named ‘Kaan’ during an event held on May 1, that year.
Going forward, TUSAŞ will continue to further test and mature its Kaan prototypes and the technologies possessed by the in-development fifth-generation multi-role fighter, with such activities currently being on schedule. The current development contract covers the initial four years of the MMU programme, with this expected to conclude with the completion of the type’s preliminary design phase.

Topics​

Read more about
Thumbnail

Originally published in Key Aero Freemium​

 

zio

Well-known member
Messages
391
Reactions
7 539
Nation of residence
Turkey
Nation of origin
Turkey
Kaan versus F35,TF 35000
 

Attachments

  • IMG_1200.jpeg
    IMG_1200.jpeg
    600.3 KB · Views: 184
  • IMG_1199.jpeg
    IMG_1199.jpeg
    535.2 KB · Views: 181
  • IMG_1201.jpeg
    IMG_1201.jpeg
    614.1 KB · Views: 162
Last edited:

infrared

Active member
Messages
54
Reactions
4 186
Nation of residence
United States of America
Nation of origin
Turkey
Kaan has not flown with indigenous flight controller etc.

Same story as Hurjet. They promote it as fully indigenous until the promotion period ends and then they tell "well actually not all components".

GHkZObLWgAA5q06.jpg
 

infrared

Active member
Messages
54
Reactions
4 186
Nation of residence
United States of America
Nation of origin
Turkey
Guys calm down, no need for personal attacks. This is not what I am saying, it is Tubitak. Attack Tubitak of you want.

Instead lets talk why Kaan was not using indigenous flight controller etc. that were previously advertised as delivered before the first flight.
 

Zafer

Experienced member
Messages
4,683
Reactions
7 7,389
Nation of residence
Turkey
Nation of origin
Turkey
Guys calm down, no need for personal attacks. This is not what I am saying, it is Tubitak. Attack Tubitak of you want.

Instead lets talk why Kaan was not using indigenous flight controller etc. that were previously advertised as delivered before the first flight.
It is the pilot who controlled the flight and he is indigenous, delivered long time ago.
 

Spitfire9

Contributor
Think Tank Analyst
Messages
538
Reactions
9 697
Nation of residence
United Kingdom
Nation of origin
United Kingdom
Apart from the engine and ejection seat, what foreign systems were in the prototype that flew? If there were some, when will they be replaced by Turkish systems?
 

Radonsider

Contributor
Messages
1,467
Reactions
14 2,802
Nation of residence
Turkey
Nation of origin
Bosnia & Herzegovina
Apart from the engine and ejection seat, what foreign systems were in the prototype that flew? If there were some, when will they be replaced by Turkish systems?
Notably FCC and some actuators.

Both will be replaced by Turkish systems in the 2nd prototype
 

Strong AI

Contributor
Messages
1,038
Reactions
35 4,216
Nation of residence
Germany
Nation of origin
Turkey
Kaan has not flown with indigenous flight controller etc.

Same story as Hurjet. They promote it as fully indigenous until the promotion period ends and then they tell "well actually not all components".

View attachment 66204

"Flight Control and Aircraft Management Computers

These are computers that manage the engine, flight control surfaces (wings) and other aircraft systems. It was used in KAAN's first flight."

 

infrared

Active member
Messages
54
Reactions
4 186
Nation of residence
United States of America
Nation of origin
Turkey
"Flight Control and Aircraft Management Computers

These are computers that manage the engine, flight control surfaces (wings) and other aircraft systems. It was used in KAAN's first flight."

Thanks. This is interesting. Tubitak tweet and website have contradicting information.
 

moz68k

Active member
Messages
127
Reactions
19 627
Nation of residence
Switzerland
Nation of origin
Turkey

They're quite transparent in the slide. If they'd used a Leonardo FCS they'd mention it. "Computers: TUBITAK".

Secondo Mona, fuel system (Italy)
OMA, hydraulic power (Italy)
Martin Baker, ejection seat (UK)
General Electric, engines (USA)
Airtificial, active sidestick (Spain)
Aerosonic, air data system (USA)
 
Last edited:

moz68k

Active member
Messages
127
Reactions
19 627
Nation of residence
Switzerland
Nation of origin
Turkey
Thanks. This is interesting. Tubitak tweet and website have contradicting information.

My theory, BİLGEM piggybacked FCS off other computers like the Central Management Computer, since they share a common architecture. The other computers don't do a lot right now, so it makes sense. Therefore, I believe the systems are in-house, but a full independent computer isn't installed for flight controls. Hence BİLGEM isn't confident announcing it's "used on the first flight", but TÜBİTAK management probably doesn't mind not making this distinction.
 

TheInsider

Experienced member
Professional
Messages
4,066
Solutions
1
Reactions
34 14,482
Nation of residence
Turkey
Nation of origin
Turkey
You can't fly this fully digital aircraft without a flight computer and you can't buy a flight computer from somewhere and fly your aircraft with it. It doesn't work that way. Probably an early version or another flight computer that is enough to make the first flight is used while the flight computer that will have the full capability is in development.

NRFRT means Near Field Rcs Test Facility. It is irrelevant and has nothing to do with the first flight. It will be ready this year.

EMC test system has nothing to do with the first flight.

A mission computer is not needed for a first flight it is evident that this aircraft is neither mission-ready nor carries any mission-specific sensors like a radar.

I think the high-speed network is self-explanatory it is not going to use network capability anytime soon.
 
Last edited:

dBSPL

Experienced member
Think Tank Analyst
DefenceHub Ambassador
Messages
2,293
Reactions
96 11,829
Nation of residence
Turkey
Nation of origin
Turkey
Looks like KSA is going for full run to Turkish toys, Kaan is 1 of them.

It would be beneficial for the relations to be more cordial for the KSA to take the step to realize the 5-ship MILGEM project, which was canceled at the last moment when all the details of the agreement had been agreed upon, and which also offered the possibility of co-production, which no other country offered.

KAAN should be the next step, contrary to what has been said, KAAN is definitely not a program that will have funding problems. First we need to see sincerity with the KSA on the issues that were on the table before.
 
Top Bottom