TR Propulsion Systems

Osman

Committed member
Messages
270
Reactions
6 527
Nation of residence
Turkey
Nation of origin
Turkey
Why we dont use turbofan engine for gezgin?

Som with ktj 3700 will most probably be a som-er.
 

Zafer

Experienced member
Messages
4,683
Reactions
7 7,389
Nation of residence
Turkey
Nation of origin
Turkey
Why we dont use turbofan engine for gezgin?

Som with ktj 3700 will most probably be a som-er.
A turbofan is a little harder to make so they are first making a Gezgin with a turbojet engine and probably they will use a turbofan in the future. Turbojet means faster and turbofan means longer range.
 

Stuka

Contributor
Think Tank Analyst
Messages
713
Reactions
5 4,540
Nation of residence
United Kingdom
Nation of origin
Turkey
BMC Power new CEO.
He doesn't say much which hasn't been known.


BMC Power 400HP (TTZA) will start serial production until the end 2022. in the 1Q 2023 100 Engines will be produced and integrated to the BMC Vuran 4x4.

> Marine Versions prepared
> Hybrid and Electric Engines are being studied
 

BalkanTurk90

Contributor
Messages
658
Reactions
5 1,028
Nation of residence
Albania
Nation of origin
Turkey
30 kn ? thats very small 30 cm diameter engine , better dont even post it .
While poor countries like india produces 800kn decades ago, we still produce 30kn ? look this what engine is
---> old 1960-70 F1 engine power Saturn 5 , Apollo mission.Even individual private Lost coutries at end of earth New zelands have produced better engine for electron rockets . 🤦‍♂️🤦‍♂️
c0548405-800px-wm.jpg
 

Zafer

Experienced member
Messages
4,683
Reactions
7 7,389
Nation of residence
Turkey
Nation of origin
Turkey
We will have 250cm diameter rocket in 5 years.

Small engines are used for second and third stages or in space propulsion rather than first stage for launch from the ground.
 

zio

Well-known member
Messages
392
Reactions
7 540
Nation of residence
Turkey
Nation of origin
Turkey
Why we dont use turbofan engine for gezgin?

Som with ktj 3700 will most probably be a som-er.
KTJ 3700 for kara atmaca ,it is cleared,but I think kale arge wil try KTJ 3200 envelop from 5000 feet high to 10000 feet,so this makes missile range longer and carring platform more safer.Kale already said that KTJ 1750 will work on 10000 feet,that is very good also,especially for UAVs they are slower than fighters.Kale follow exactly the pathway of safran-microturbo jets,so we can assume that arat named TJ will be around 5k newton power and this one will be power gezgin missile,like French MBDA scalp naval cruise missile.Kale TJ engines a little bit heavy than microturbo TR series,but Kale says its engines can work longer time.Nevertheles micro turbo engines can work longer on than the export versions.SOM missiles with ktj 3200 will be free of this restrictions,and can go longer,but you have to add more fuel on it,but we cannot make design change without reducing warhead,so as ı said before 10000 feet upgrade of ktj 3200 make more range easily without changing design just with extra more test on it.I will attach a good information about microturbo jets if ı can.You can see how wide use of these turbojet motors on many missiles and many target drones
 

Attachments

  • F655_CompleteSample.pdf
    307.7 KB · Views: 238
  • AE04929E-4285-4601-AA1C-C008671E25D0.jpeg
    AE04929E-4285-4601-AA1C-C008671E25D0.jpeg
    647.4 KB · Views: 152
  • 01F26D4F-22A5-4F51-BA44-7619818A47BC.jpeg
    01F26D4F-22A5-4F51-BA44-7619818A47BC.jpeg
    564.4 KB · Views: 103
Last edited:

Bmx98

Committed member
Messages
159
Reactions
346
Nation of residence
Albania
Nation of origin
Albania
Woooow
To think Kale actually surpassed TEI in something; Iam honestly impressed

TEI needs to step up their game; I know that they are busy developing many different engines of various classes but TEI is TEI after all. All in all, competition is good as it promotes growth
Works has been divided. Tei is focusing on aero engines for manned flying platforms while kale is focusing on missile engines.
 

Rodeo

Contributor
Moderator
DefenceHub Diplomat
Messages
1,330
Reactions
31 5,067
Nation of residence
Turkey
Nation of origin
Turkey
Small engines are used for second and third stages or in space propulsion rather than first stage for launch from the ground.
Vacuum engines are bigger than the engines of the first stage due to the difference of ambient pressure.

The left is sea-level raptor, the right is vacuum-optimized raptor.

EhHDuH7VoAAZtaw_2000x.jpg
 

Rodeo

Contributor
Moderator
DefenceHub Diplomat
Messages
1,330
Reactions
31 5,067
Nation of residence
Turkey
Nation of origin
Turkey
30 kn ? thats very small 30 cm diameter engine , better dont even post it .
While poor countries like india produces 800kn decades ago, we still produce 30kn ? look this what engine is
---> old 1960-70 F1 engine power Saturn 5 , Apollo mission.Even individual private Lost coutries at end of earth New zelands have produced better engine for electron rockets . 🤦‍♂️🤦‍♂️
View attachment 49740

A single Rutherford engine of Electron rocket produces 25kN force, which is lower than 30kN. But Rocket Lab uses 9 of them to lift Electron off the ground. The rocket is like a scaled down Falcon 9.

5fa42987f7d1cb0019e39fdf


By the way, Rocket Lab is not a New Zealand company. They're American. They just launch from New Zealand.
 
Last edited:

Afif

Experienced member
Moderator
Bangladesh Correspondent
DefenceHub Diplomat
Bangladesh Moderator
Messages
4,755
Reactions
94 9,094
Nation of residence
Bangladesh
Nation of origin
Bangladesh
KTJ 3700 for kara atmaca ,it is cleared,but I think kale arge wil try KTJ 3200 envelop from 5000 feet high to 10000 feet,so this makes missile range longer and carring platform more safer.Kale already said that KTJ 1750 will work on 10000 feet,that is very good also,especially for UAVs they are slower than fighters.Kale follow exactly the pathway of safran-microturbo jets,so we can assume that arat named TJ will be around 5k newton power and this one will be power gezgin missile,like French MBDA scalp naval cruise missile.Kale TJ engines a little bit heavy than microturbo TR series,but Kale says its engines can work longer time.Nevertheles micro turbo engines can work longer on than the export versions.SOM missiles with ktj 3200 will be free of this restrictions,and can go longer,but you have to add more fuel on it,but we cannot make design change without reducing warhead,so as ı said before 10000 feet upgrade of ktj 3200 make more range easily without changing design just with extra more test on it.I will attach a good information about microturbo jets if ı can.You can see how wide use of these turbojet motors on many missiles and many target drones
ARAT will have thrust level somewhere in between KTJ3200 and KTJ3700 but will come with improved SFC.

 

Hexciter

Experienced member
Messages
2,575
Reactions
4 11,451
Nation of residence
Turkey
Nation of origin
Turkey
“A better outside linking “
 

Afif

Experienced member
Moderator
Bangladesh Correspondent
DefenceHub Diplomat
Bangladesh Moderator
Messages
4,755
Reactions
94 9,094
Nation of residence
Bangladesh
Nation of origin
Bangladesh
“A better outside linking “
Sorry man! I am not with my pc right now!😂
 

Hexciter

Experienced member
Messages
2,575
Reactions
4 11,451
Nation of residence
Turkey
Nation of origin
Turkey
Members with engineering background or any one have knowledge can enlighten me whether the Arat engine will be high-bypass variant of existing?
Thank you.
 

Afif

Experienced member
Moderator
Bangladesh Correspondent
DefenceHub Diplomat
Bangladesh Moderator
Messages
4,755
Reactions
94 9,094
Nation of residence
Bangladesh
Nation of origin
Bangladesh
Members with engineering background or any one have knowledge can enlighten me whether the Arat engine will be high-bypass variant of existing?
Thank you.
ARAT is a turbojet. There is no bypass ratio at all.
 

Cabatli_TR

Experienced member
Staff member
Administrator
Messages
5,360
Reactions
81 45,455
Nation of residence
Turkey
Nation of origin
Turkey
Mr Akşit: "We are one of the 2-3 companies in the world that can produce blisk integrated wing/disc assemblies to the required tolerance and strength"
 

Follow us on social media

Latest posts

Top Bottom