TR Propulsion Systems

[Rodeo]

TEI plans to deliver the first two serially-produced TS1400s next year.

PD222 will become airworthy next year.

TEI also develops more powerful diesel engines that have the same dimensions(retrofittable) with PD222.

https://twitter.com/i/web/status/1697543962649645334

https://twitter.com/i/web/status/1697548261219774578

 

[Zafer]

Question: What is the hp of the next power TEI diesel engine up to the PD225;

 

[Bürküt]

Question: What is the hp of the next power TEI diesel up to the TD225;

There is a post that Sayın Cabatlı shared in time

Propulsion Systems

Friendly and allied Nato countries? There arent lots of. Hungary , Spain ,poland three of them comes to mind that dont let / support Separatist agaist Turkiye

defencehub.live

 

[Zafer]

View attachment 60715

There is a post that Sayın Cabatlı shared in time

Propulsion Systems

Friendly and allied Nato countries? There arent lots of. Hungary , Spain ,poland three of them comes to mind that dont let / support Separatist agaist Turkiye

defencehub.live

I was testing knowledge of people, but you seem to have a cheat sheet, .

 

[Zafer]

This is one sweet engine you can find many uses for; a civilian plane using a couple of these 305hp engines can cruise the world with 6 people on board, what a dream.

 

[Bürküt]

I was testing knowledge of people, but you seem to have a cheat sheet, .

The 305 was already in my mind , trust me I have a good memory . Just to be sure, I just checked .

 

[zio]

One more fan will give F119 as a design with wider and longer

 

[Zafer]

What is curious is how TEI achieves the required air pressure level with a smaller number of fans than the older generations. Probably the low pressure fans are more efficient and the jobs of high pressure fans become easier.

 

[Brokengineer]

The main fan is a large single piece blisk which is outstanding.

Is it only main fan or the remaining others as well?

 

[Zafer]

Is it only main fan or the remaining others as well?

The main fan is the biggest and hardest to make, as it is a big chunk of metal to manipulate in a CNC machine. The other parts are easier to make afaik, so all other compressor fans can be safely supposed to be blisks.

 

[moz68k]

At Teknofest, I learned that there are very few kinks left to iron out before LRIP of TS1400 begins. SSB is pushing for max. 1600shp sustained, engineers seemed quite chill about it. Civilian certification will follow. Make of that what you will.

 

[Windchime]

Mahmut Akşit:

"These motors attract a lot of attention from the world. Another request came from a foreign customer. They immediately ask, 'When will you start, when will you start mass production?'

We have foreign customers who want a quote for these engines from us. 'When will you deliver, how much money do you want?' We take the questions."

He also said that there are foreign customers who want to use TF6000 in twin configuration for their trainer aircraft.

https://twitter.com/i/web/status/1697185139854291402

It's an attractive alternative to existing military engines of its class. Adour lost its momentum to extend its relevance in the market since Mk 821 and Mk 951 variants didn't see any adoptions in great numbers, TFE731 is an old design and F124/F125 is subject to ITAR. AI-222/322 is still a very attractive choice but its future prospects largely depend on the outcome of the ongoing war. AI-222 variants manufactured by Russia are out of question and the state of development of Chinese WS-17 is unclear.

So if a potential customer wants an engine that Is ITAR free, all that TEI needs to do is beat Ivchenko Progrsss on their bid. Even if a customer doesn't mind ITAR limitations and F124 is their prime choice, TEI could possibly out-bid Honeywell with better offers.

Though they should also keep in mind that other players are entering the market and it's not just their cake to eat.

Could it be Aermachhi M-346 or Taiwan's F-CK-1 ?

No and no. Why would they replace perfectly fine F124 and F125?

 

[zio]

At Teknofest, I learned that there are very few kinks left to iron out before LRIP of TS1400 begins. SSB is pushing for max. 1600shp sustained, engineers seemed quite chill about it. Civilian certification will follow. Make of that what you will.

SSB made a big mistake for not supporting TEI TS 3000 4 years ago

 

[Cabatli_TR]

SSB made a big mistake for not supporting TEI TS 3000 4 years ago

In prioritization plans, the importance of having domestic axial type turbofan engines may have been seen as more essential. With Tf6000/10000, both Kızılelma and Anka-3/4, which are nearing the end of their development phase will be answered and it will also be a test-bed for KAAN's more powerful engine program. In this way, unlike TS1400, the first military type gas turbine engine with an axial compressor technology will be gained. Qs a result of this program, A 3000-3500hp turboshaft engine will be developed from the core of TF6000. In other words, we can say that TEI aims to kill many birds with one stone.

 

[uçuyorum]

Isn't TF6000 and even preliminary work being done by TEI for TF35000 made by their initiative and their own resources because of SSB's continued indecisiveness?

 

[Bürküt]

No and no. Why would they replace perfectly fine F124 and F125?

Who might be the foreign customer wants to put TF6K to twing engine trainer aircraft then. The F124 is used in almost all twin-engine trainer aircraft.Just China comes to my mind .As far as I know they are the only ones who don't use F124 on their twin engine aircraft and need an engine in this class.

 

[Rodeo]

Who might be the foreign customer wants to put TF6K to twing engine trainer aircraft then. The F124 is used in almost all twin-engine trainer aircraft.Just China comes to my mind .As far as I know they are the only ones who don't use F124 on their twin engine aircraft and need an engine in this class.

The wording of Mahmut Akşit suggests that it will be a newly designed trainer(at least to me)

 

[zio]

In prioritization plans, the importance of having domestic axial type turbofan engines may have been seen as more essential. With Tf6000/10000, both Kızılelma and Anka-3/4, which are nearing the end of their development phase will be answered and it will also be a test-bed for KAAN's more powerful engine program. In this way, unlike TS1400, the first military type gas turbine engine with an axial compressor technology will be gained. Qs a result of this program, A 3000-3500hp turboshaft engine will be developed from the core of TF6000. In other words, we can say that TEI aims to kill many birds with one stone.

TEI even did not got one stone two birds with tırboprop version of TS 1400,I dont satisfy with an answer like we dont need it.

 

[Bürküt]

The wording of Mahmut Akşit suggests that it will be a newly designed trainer(at least to me)

Could it be a another country's project that hasn't been announced yet .I was able to find these as a new design and I don't think them use TF6K instead of F124/125 :

Establishing a secure connection ...

Spanish project

Aeralis’s Modular Aircraft Advances Toward the Hardware Stage | AIN

Aeralis has seen considerable progress in the development of its modular aircraft concept through a series of high-level agreements.

www.ainonline.com

British project

 

[Bürküt]

Qs a result of this program, A 3000-3500hp turboshaft engine will be developed from the core of TF6000. In other words, we can say that TEI aims to kill many birds with one stone.

It will be the engine of both Anka3 and Kızılelma.It will be turned into a marine engine and used in KAAN class assault boats.Even as it is TEİ will kill many birds with one stone.

I have asked Sayın @Yasar many times before "is it possible a 3000-3500hp turboshaft can be easily produced from the core of the TF6000" and he said "Producing a 3000HP engine from the TF6000 engine means , seriously reducing the diameter of this engine and seriously changing the fan and turbine structure of this engine.A certain amount of time and some new technical development phases can be saved.But you basically have to build engines almost from scratch."

The diameter of the combustion chamber of the engine to be produced for Atak 2 will be at most half of the TF6000.I conclude that the TS3000 will be a brand new engine, not a derived engine. Sayın F. Akşit was said " we will increase the diameter of the TF6000 and build a KAAN engine from here".I think relevance between TF6000 and TS3000 is the same also.Not like Snecma M88-TP400.