TR UAV/UCAV Programs | Anka - series | Kızılelma | TB - series

Anmdt

Experienced member
Naval Specialist
Professional
Messages
5,502
Solutions
2
Reactions
118 24,888
Nation of residence
Turkey
Nation of origin
Turkey
Regarding IR suppression, Akinci will be flying far above the range of IR guided missiles, and against aircraft launched AA missiles or SAMs: it's not a stealth aircraft so it's pointless to hide the IR signature when it will be visible to radar anyway. As I said, you have some kind of grudge against Baykar which is why an otherwise educated person like you is coming up with these irrational reasons to trash them.
I would like to reply further but each time you come up with something new.

First: I don't imply an IR suppression like the ones installed on attack helicopters, but at least preventing the extrusion of the exhaust channel, covering it engine cases thus not leaving a metallic-heated part facing to ground. Furthermore as Baykar is often mentioned of innovation by their fans, so it would be better for their engineering capability-image by developing an innovative supression system similar to the helicopters, could benefit them.

Second: The drone has maximum altitude, yet it won't be achieved when it is fully loaded with missiles and internal payload, it will definitely need to go down to range of MANPADS.

If you carefully look Turboprop aircraft in military you will see their exhaust channel left in engine casing. Golden rule of IR signature: Dont leave hot tips exposed, for ships it is "any" for planes "facing toward ground". These metallic surfaces shine up in FLIR, even at the simplest one, from 20k altitude.
Seeing MQ-9's exhaust you will get what i intend to mean.
 

Anmdt

Experienced member
Naval Specialist
Professional
Messages
5,502
Solutions
2
Reactions
118 24,888
Nation of residence
Turkey
Nation of origin
Turkey
You can not progress only with positive feedback. A negative feedback is not condescending.
For people with a complex, it is condescending.
Especially when the outcome is a product. Example: Anka, see where did it come from, to where and it is achieved by feedback. There is another project which i can not name has been improved by 300%, by negative feedbacks.
I suggest you to not personalize discussions.
 
Last edited by a moderator:

Anmdt

Experienced member
Naval Specialist
Professional
Messages
5,502
Solutions
2
Reactions
118 24,888
Nation of residence
Turkey
Nation of origin
Turkey
Looking down on the work of many engineers
stating the obvious is not looking down on the project or the work itself, or there is something to be glorified unnecessarily. The project is still in development, their first time with a turboprop engine, turboprop engines are freshly installed so maybe they haven't even started IR signature evaluation but rather working on the flight, moreover the engine with casing was delivered by Ukraine so it has nothing to do with Baykar.
This doesn't change the fact, if remains as is, those engines are perfect targets for IR missiles. And this statement does not look down on the project but only raises concerns.
Don't bend my words.
 
E

Era_shield

Guest
Second: The drone has maximum altitude, yet it won't be achieved when it is fully loaded with missiles and internal payload, it will definitely need to go down to range of MANPADS.
Baykar's Akinci webpage says "operational maximum altitude: 30,000 feet - 40,000 feet", implying 30k ft will be its max operational altitude for its heaviest expected mission load. In any case, Akinci will not be flown within MANPADS range. If for whatever unlikely reason it came to that, the operator will instead reduce the load or sacrifice endurance or something else. Even with a fully shrouded engine the risk of MANPADS is still high because newer ones can detect the silhouette of the airframe against the sky using a UV sensor or other sensors - no engine heat required. So, again, MANPADS are irrelevant to Akinci's mission.

Golden rule of IR signature: Dont leave hot tips exposed, for ships it is "any" for planes "facing toward ground". These metallic surfaces shine up in FLIR, even at the simplest one, from 20k altitude.
Seeing MQ-9's exhaust you will get what i intend to mean.
Ok. Standard practice. Golden rule. Simple even for the dumbest military aeronautical engineer. Yet apparently Baykar's engineers failed to do it? Either they are the dumbest engineers in the world or there's nothing wrong with it the way it is.
 

Anmdt

Experienced member
Naval Specialist
Professional
Messages
5,502
Solutions
2
Reactions
118 24,888
Nation of residence
Turkey
Nation of origin
Turkey
Ok. Standard practice. Golden rule. Simple even for the dumbest military aeronautical engineer. Yet apparently Baykar's engineers failed to do it? Either they are the dumbest engineers in the world or there's nothing wrong with it the way it is.
Will not rewrite, the highlighted part is answer to this part:
Also, i didn't imply anything about the company or the engineers. stop these arguments,i have friends at that company, i have no reason to look down on them,or the company, or i am not an alien to Baykar.
stating the obvious is not looking down on the project or the work itself, or there is something to be glorified unnecessarily. The project is still in development, their first time with a turboprop engine, turboprop engines are freshly installed so maybe they haven't even started IR signature evaluation but rather working on the flight, moreover the engine with casing was delivered by Ukraine so it has nothing to do with Baykar.
This doesn't change the fact, if remains as is, those engines are perfect targets for IR missiles. And this statement does not look down on the project but only raises concerns.
Don't bend my words.
Baykar's Akinci webpage says "operational maximum altitude: 30,000 feet - 40,000 feet", implying 30k ft will be its max operational altitude for its heaviest expected mission load. In any case, Akinci will not be flown within MANPADS range. If for whatever unlikely reason it came to that, the operator will instead reduce the load or sacrifice endurance or something else.
This is the contradictory part, if Baykar is capable of delivering the platform with conditioned IR signature,which i believe they are and they will do it such, why to even concern about this numbers regarding to altitude?
Even with a fully shrouded engine the risk of MANPADS is still high because newer ones can detect the silhouette of the airframe against the sky using a UV sensor or other sensors - no engine heat required. So, again, MANPADS are irrelevant to Akinci's mission.
Then let's scrap all those standards because missiles are advanced,
There is a reason why standards and requirements exists, the harder your platform is to be detected, the better and higher tech systems are used to detect it which won't be available in mass numbers. Also these systems wouldn't be available to all, but only trained operators. If not well managed such IR can be detected from simple E/O available at almost any APC.

My point was not Manpads solely, it was only given as an extreme example of IR guided missiles, yet still it doesn't change the fact in several occasions the drone can be exposed to manpads threat, like other drones with similar altitudes, or jets with higher operational altitudes have faced this threat when they needed to cruise at lower altitudes for several reasons.
 

AzeriTank

Contributor
Messages
711
Reactions
3 1,795
Nation of residence
Azerbaijan
Nation of origin
Azerbaijan
Rear-aspect IR signature wouldn't really come into play in that scenario since the Akinci and enemy jet would be facing each another.

Jamming/deception like that could work for older radars, but if the enemy jet also has an AESA radar, jamming or deceiving it by just using your own AESA radar isn't likely. Usually special ESM/ECM equipment is needed to achieve that against AESA systems. Also, some A2A missiles now have home-on-jam mode, so it might just make it easier for the missile to find you. But overall this is good for the Akinci because the enemy jet can't easily jam/deceive its AESA radar either, yet the Akinci has no pilot and costs less, and has much longer loiter time. It has the advantage.
the reason i said both the main air defense radar (or the AESA radar that whose jets have) and radar on the missile is, even though you cannot jam the main radar, you still can jam the radar on the missiles at the final stage when it turns on its radar... no air force use AESA radars on those missiles and they are so expensive, including Turkey.. thats why some countries want to use both IIR and radar together but it needs another 5 years at least, as the problem is when the missile fly more than 25 km, the IIR head heats up and at final stage might not be accurate.. but as you know, they are planning to put a cover on it, s it needs tests for years.. until that MIUS and GOksungur will be around..

IR signature would always be there, as its a jet engine, it push the heat back. but when you use the aircraft smart, you can get rid of it most of the times... i mean knowing your weekness and not to put yourself in that situation, its not a tb2 to fly on target, it will shoot areas far and the ground attack move at the same time with tb2s..

Also, those who got no idea, it doesnt really matter what aircraft you have, once you send the WVR air to air missiles that have IIR head on, there is not way you can run from it.. take it f22 or any other aircraft... thats why the whole new concept is to be able to shoot missiles, or get that closer, before the danger area of 25-30 km. the future is DICM systems. all those missiles with IIR head, will be downed with these systems, but you need an energy to use it. THATS WHY, AKinci use strong Turboprob engines...
I am sure if anybody would give all this info, would get a positive star, but somehow i never got one.. )
 
Last edited:

Nilgiri

Experienced member
Moderator
Aviation Specialist
Messages
9,764
Reactions
119 19,787
Nation of residence
Canada
Nation of origin
India
I would like to reply further but each time you come up with something new.

First: I don't imply an IR suppression like the ones installed on attack helicopters, but at least preventing the extrusion of the exhaust channel, covering it engine cases thus not leaving a metallic-heated part facing to ground. Furthermore as Baykar is often mentioned of innovation by their fans, so it would be better for their engineering capability-image by developing an innovative supression system similar to the helicopters, could benefit them.

Second: The drone has maximum altitude, yet it won't be achieved when it is fully loaded with missiles and internal payload, it will definitely need to go down to range of MANPADS.

If you carefully look Turboprop aircraft in military you will see their exhaust channel left in engine casing. Golden rule of IR signature: Dont leave hot tips exposed, for ships it is "any" for planes "facing toward ground". These metallic surfaces shine up in FLIR, even at the simplest one, from 20k altitude.
Seeing MQ-9's exhaust you will get what i intend to mean.

MQ-9, Eitan etc, are helped by one engine and thus fuselage fairing availability compared to akinci where you got to do this "twice" effectively and on each wing too (burdening performance envelope more than twice as much given wing moments for same return etc). Fuselage has lot more structural cohesion for this kind of thing.

Maybe this is a initial/mid setup + testing iteration too.

You can see some instability/mini-surge probably from throttle ramp testing vis-a-vis surge valves etc. as my first hunch but hard to exactly say whats going on in this video.

But such testing would benefit from having hot-section+tailpipe more accessible and visual (given instrumentation lag for various phenonemon) at this stage of dev.

Let us see what the final deployed iteration looks like, IR suppression is indeed very important.

Maybe tailpipe can be rerouted/nozzled differently somewhat, but it depends how much performance from exhaust (jet) may be needed in some op. regimes too. I have not looked into the platform and engine that much.

So maybe the chosen design layout (Engine on each wing) inherently is somewhat unable to do this feasibly to large extent and the tradeoffs were found acceptable. Let us see.
 

Nutuk

Contributor
Think Tank Analyst
Messages
1,017
Reactions
8 3,638
Nation of residence
Nethelands
Nation of origin
Turkey
I think @anmdt has a point, the engines of Akinci look indeed without IR suppression.

But than again Baykar is a company that is improving on feedbacks, so if this is found troublesome by the military they will have to bring on IR suppression eventually.

Let see, first is first. Let the bird fly first before shooting it down
 

AzeriTank

Contributor
Messages
711
Reactions
3 1,795
Nation of residence
Azerbaijan
Nation of origin
Azerbaijan
I think @anmdt has a point, the engines of Akinci look indeed without IR suppression.

But than again Baykar is a company that is improving on feedbacks, so if this is found troublesome by the military they will have to bring on IR suppression eventually.

Let see, first is first. Let the bird fly first before shooting it down
we all know it, you need to be blind not to see it. the question, is it critical? Can it survive without it?
 
Last edited:

mysndgn

Active member
Messages
31
Reactions
64
Nation of origin
Turkey
Roketsan released the new video of the CİRİT Missile


The CİRİT Missile system, used in ANKA and AKSUNGUR, continues to maintain its deterrent effect.

 
T

Turko

Guest
Baykar's Akinci webpage says "operational maximum altitude: 30,000 feet - 40,000 feet", implying 30k ft will be its max operational altitude for its heaviest expected mission load. In any case, Akinci will not be flown within MANPADS range. If for whatever unlikely reason it came to that, the operator will instead reduce the load or sacrifice endurance or something else. Even with a fully shrouded engine the risk of MANPADS is still high because newer ones can detect the silhouette of the airframe against the sky using a UV sensor or other sensors - no engine heat required. So, again, MANPADS are irrelevant to Akinci's mission.


Ok. Standard practice. Golden rule. Simple even for the dumbest military aeronautical engineer. Yet apparently Baykar's engineers failed to do it? Either they are the dumbest engineers in the world or there's nothing wrong with it the way it is.
C'mon brother, no one said they were dumbs. No need to exaggerate. We all respect Turkish engineers apart from capitalist bloodsucker monopolists.
 

Combat-Master

Baklava Consumer
Moderator
Messages
3,667
Reactions
15 25,474
Nation of residence
United Kingdom
Nation of origin
Turkey
we all know it, you need to be blind not to see it. the question, is it critical? Can it survive without it?

It is nit-picking for sure, no plane is going to go full throttle to where flames going to be spewing out for the duration of it's flight.

Gorgeous :)
ezgif-3-bc59b9e4a3bc.gif
 

Yasar_TR

Experienced member
Staff member
Administrator
Messages
3,248
Reactions
141 16,281
Nation of residence
United Kingdom
Nation of origin
Turkey
Roketsan released the new video of the CİRİT Missile


The CİRİT Missile system, used in ANKA and AKSUNGUR, continues to maintain its deterrent effect.

Yes they are used in Anka and Aksungur. But Cirit missile was developed for a number of uses. It was developed to be used from Atak t-129 as well. And managed to hit close to 10 km target. It is specified to be effective in 8km.
It has a tri mode (anti personnel, anti armour and incendiary).
It has a anti personnel only mode where it is more effective.
It has a thermobaric mode where it is more effective towards structures and personnel.
They are also used from armoured carriers and naval platforms in surface to surface mode.
At around 20K dollars per missile they are “cheap” for what they can achieve.
It can be used against light armoured vehicles, as a “poor man’s hellfire missile”.
 

Test7

Experienced member
Staff member
Administrator
Messages
4,785
Reactions
19 19,937
Nation of residence
United States of America
Nation of origin
Turkey

Ukraine expects to buy Turkish drones this year​

Country plans to receive Turkish unmanned aerial vehicles, corvettes, says commander of naval forces​


thumbs_b_c_078003ee3ab03f0570f91c8eca8d6de1.jpg


Ukrainian Naval Forces Commander Oleksiy Neizhpapa Monday said Ukraine this year expects to receive Turkish unmanned aerial vehicles (UAVs) and corvettes for its navy.

The country plans to buy Turkey's Bayraktar TB2 UAVs, he told the Ukrainian media.

Neizhpapa also said Ukraine will use the drones both in sea and land operations, adding that his country will reach a production capacity at NATO standards thanks to Ada-class corvettes jointly produced with Turkey.

 

Stuka

Contributor
Think Tank Analyst
Messages
713
Reactions
5 4,540
Nation of residence
United Kingdom
Nation of origin
Turkey
Baykar Defence AKINCI

The UAV seems to be proceeding according to plan and deliveries are to be expected in 2021.
This Tweet from the Official Baykar Twitter Account seems to suggest so.
I am not sure if they are referring to the entire Program or (more likely) the 3rd Prototype.
This tweet is from 4 Months ago (29th August 2020), so it would be likely that the 3rd Prototype (PT-3) is about to start flying.
But i have noticed that the Ismail Demir had announced Deliveries of the AKINCI until the end of 2020, but its safe to assume that it got delayed due to the Pandemic.
The Source for that: (Date of the Statement is 6th January 2020)
The latest Statement from Selcuk Bayraktar revised the date to 2021 (Date of Statement 5th September 2020)

Additionally I was questioning which engine would be used due to multiple variants by motor sich and Baykars Offical Site seems to have been upgraded since and. They offer two variants 450hp and 750hp)

1609876378274.png


So we are talking the about this Engine Family.

1609876500089.png


The Question remains, what engines are the Prototypes using because there is a significant difference in Power Output and I am unsure which engines are used as a basis for the figures of the UAV.
for instance does the Capacity of 1350kg apply for one or both of the engines.

For Comparison
The MQ9 Reaper has a payload capacity of 1700kg with 1x 900hp Honeywell TPE331-10 turboprop Engine.
AKINCI with 1500hp (2x 750hp AI-450C-2) should theoretically be able to dwarf that number.
 

Nilgiri

Experienced member
Moderator
Aviation Specialist
Messages
9,764
Reactions
119 19,787
Nation of residence
Canada
Nation of origin
India
The Question remains, what engines are the Prototypes using because there is a significant difference in Power Output and I am unsure which engines are used as a basis for the figures of the UAV.
for instance does the Capacity of 1350kg apply for one or both of the engines.

For Comparison
The MQ9 Reaper has a payload capacity of 1700kg with 1x 900hp Honeywell TPE331-10 turboprop Engine.
AKINCI with 1500hp (2x 750hp AI-450C-2) should theoretically be able to dwarf that number.

For now it is more reflected in MTOW numbers:

MQ-9 = 4.8 ton

Akinci = 5.5 ton


MQ-9 empty weight = 2.2 ton for comparison

If anyone has Akinci empty weight, it would be useful to see that to gain idea of basic performance envelope.

With this in mind I would say the Akinci payload number is provisional one given empty weight is not given at manufacturer's site yet:


That or there is an operational profile tradeoff (baked into the empty weight design itself) w.r.t various ranges, speed and endurance need versus payload need.

I think we just need to give some more time for some numbers to be more clear from manufacturer end as there are two engine options apparently (450 hp and 750 hp) to begin with.
 

Follow us on social media

Latest posts

Top Bottom