TR Naval Programs

Iskander

Contributor
Think Tank Analyst
Messages
532
Reactions
11 1,502
Nation of residence
Azerbaijan
Nation of origin
Azerbaijan
The Ada project is becoming one of the most popular in the world.

1733897414701.png


«The Turkish company Istanbul Denizcilik A.Ş. has begun the simultaneous construction of three Milgem-class corvettes (Ada type). The customer is the Malaysian Navy, which is expected to receive all purchased ships by the end of 2027.
The displacement of the corvette is about 2,500 tons, length 99.56 m, width 14.42 m, draft 3.94 m. Maximum speed 26 knots; cruising range exceeds 4,000 nautical miles at a speed of 14 knots; cruising time is 14 days. The crew consists of 111 sailors.
The armament consists of a 76-mm main gun from the local company Havelsan, 8 anti-ship missiles ATMACA (2x4) developed by Roketsan, 4 South Korean short-range air defense systems (up to 20 km) Haegung (16 launch cells), one 30-mm auxiliary remote-controlled artillery mount SMASH from Aselsan, two decoy launch systems.
The Ada ("island") project is becoming one of the most popular in the world», - writes the Russian military publication.

 
Last edited:

Sanchez

Experienced member
Moderator
Think Tank Analyst
DefenceHub Diplomat
Messages
2,447
Reactions
83 11,199
Nation of residence
Turkey
Nation of origin
Turkey

Strong AI

Contributor
Messages
1,106
Reactions
39 4,481
Nation of residence
Germany
Nation of origin
Turkey
And here she is as promised. I see the 76mm gun, AKR-D for the gun, MAR-D radar, Ahtapot Denizgözü EO system, with LPI radars at the mast and aft and an ESM system.

K6To1WN.jpeg




Looks like they went with Unirobotics.

Doubting if it has anything to do with unirobotics, stamp still takes its place on I-class and TF-2000. Unirobotics has failed big time and let all wait and see if it will go public. It was planned for ADKG but from this point on, i have got a feeling that stamp may take its place.

Fun fact; Unirobotics' mere strong hand was few high ups in ASFAT, all replaced by proper people with the change in power and care to check who is the GM of ASFAT nowadays. I will give a tip, he is from Aselsan. :)
 

Anmdt

Experienced member
Naval Specialist
Professional
Messages
5,523
Solutions
2
Reactions
118 25,038
Nation of residence
Turkey
Nation of origin
Turkey
Looks like they went with Unirobotics.
Unirobotics didn't complete the harbor acceptance tests on time and didn't complete the majority of the tests required to accept the system.

They also didn't complete the integration process in time.

So at the moment it's the only system that's sailing that hasn't completed the Harbour Acceptance Tests (HAT).

They are going with unirobotics since they made the deal two years ago and waited for them to develop rcws (not calling is stabilized, I can't dare to put it in that category when compared to stamp).

Anyway, it is a long way to see what happens, but I am sad to see that no one dares to impose fines on unirobotics for delays and not fulfilling the requirements. We have seen what happens when a company is protected by higher authorities (Sancak's BMC). It never benefits the country or the armed forces. I can't polish unirobotcis after seeing how they fail in the field and are protected by higher ups to get a go and get milestone payments.

I don't have a fetish to talk negatively when it comes to new products, you don't hear me talk bad about Tubitak's Yelkovan ED or MKE's 76mm since both do what promised, and do it in the given and agreed time. (CMS integration etc. FAT,HAT, SAT).
 

IC3M@N FX

Committed member
Messages
248
Reactions
10 513
Nation of residence
Germany
Nation of origin
Turkey
What are the plans for further Istanbul class ships for the Turkish Navy?
How far is the design phase of the Turkish destroyers, the TCG Anadolu does not need to go to foreign waters if it does not have a decent escort for air defense, ship and anti-submarine warfare.
Let alone exert pressure on the Black Sea and the Mediterranean.
 

uçuyorum

Contributor
Messages
958
Reactions
13 1,580
Nation of residence
Turkey
Nation of origin
Turkey
What are the plans for further Istanbul class ships for the Turkish Navy?
How far is the design phase of the Turkish destroyers, the TCG Anadolu does not need to go to foreign waters if it does not have a decent escort for air defense, ship and anti-submarine warfare.
Let alone exert pressure on the Black Sea and the Mediterranean.
You frequent here so I thought you would know, anyways 3 ships in construction and 4 more to follow for istifs, and TF2000 has gone through a lot of design iterations but we have been hearing any day now for the finalisation of design and start of construction
 

Yasar_TR

Experienced member
Staff member
Administrator
Messages
3,264
Reactions
145 16,388
Nation of residence
United Kingdom
Nation of origin
Turkey
You frequent here so I thought you would know, anyways 3 ships in construction and 4 more to follow for istifs, and TF2000 has gone through a lot of design iterations but we have been hearing any day now for the finalisation of design and start of construction
Just to add and correct if I may :

Milgem project as we know it stands at 12 ships;

Ships consisting of 4 Ada Class corvettes and are, no 1 to 4
Ship No 5 is TCG Istanbul
Ships No 6 to 8 are under construction and will be finished all together.
Ships No 9 and 10 have had their steel cutting. (See no 10 pic below)
Ships No 11 and 12 were awaiting steel cutting.

1734183717518.jpeg


TF2000 destroyer is awaiting steel cutting, unless more design changes are implemented. As it stands the construction work program has been officially launched by Asfat. Steel cutting ceremony was arranged. But RTE had to postpone it due to his busy personal program.

quote:
According to information published by ASFAT on September 20, 2024, Turkey has officially launched the construction of its first domestically designed and produced air defense destroyer, the TF-2000.
unquote.

 

BalkanTurk90

Contributor
Messages
680
Reactions
5 1,064
Nation of residence
Albania
Nation of origin
Turkey
As i now , 5 istanbul class are under contruction , 3 of them we may see at their complete form for few month like with hisar opv .
2 of them just steel cutting few month ago .
Tf2000 no official yet but some of its parts are under contrstruction .
I want to know about :
1- Other 8 Hisar class ? Will they be build all in same time and how aboit its SAMs ?
2- Stm 500 submarine ??
3- FAC program of 10 of them ??!
4- New Tank landing ships like bayraktar but bigger ??
 

Anmdt

Experienced member
Naval Specialist
Professional
Messages
5,523
Solutions
2
Reactions
118 25,038
Nation of residence
Turkey
Nation of origin
Turkey
Just to add and correct if I may :

Milgem project as we know it stands at 12 ships;

Ships consisting of 4 Ada Class corvettes and are, no 1 to 4
Ship No 5 is TCG Istanbul
Ships No 6 to 8 are under construction and will be finished all together.
Ships No 9 and 10 have had their steel cutting. (See no 10 pic below)
Ships No 11 and 12 were awaiting steel cutting.

View attachment 72672

TF2000 destroyer is awaiting steel cutting, unless more design changes are implemented. As it stands the construction work program has been officially launched by Asfat. Steel cutting ceremony was arranged. But RTE had to postpone it due to his busy personal program.

quote:
According to information published by ASFAT on September 20, 2024, Turkey has officially launched the construction of its first domestically designed and produced air defense destroyer, the TF-2000.
unquote.

It wasn't Erdogan's busy schedule, TF-2000's steel cutting wasn't meant to be done at the date Naval Insider had made up :).

TF-2000's design is maturing after changes, it may take time.
 

Strong AI

Contributor
Messages
1,106
Reactions
39 4,481
Nation of residence
Germany
Nation of origin
Turkey
It wasn't Erdogan's busy schedule, TF-2000's steel cutting wasn't meant to be done at the date Naval Insider had made up :).

TF-2000's design is maturing after changes, it may take time.
Do you know the reason why they want to place only one NAZAR DIRCM? Is it because of the power output of the generators?
 

Ripley

Contributor
USA Correspondent
Messages
670
Reactions
16 1,909
Nation of residence
United States of America
Nation of origin
Turkey
Just to add and correct if I may :

Milgem project as we know it stands at 12 ships;

Ships consisting of 4 Ada Class corvettes and are, no 1 to 4
Ship No 5 is TCG Istanbul
Ships No 6 to 8 are under construction and will be finished all together.
Ships No 9 and 10 have had their steel cutting. (See no 10 pic below)
Ships No 11 and 12 were awaiting steel cutting.

View attachment 72672

TF2000 destroyer is awaiting steel cutting, unless more design changes are implemented. As it stands the construction work program has been officially launched by Asfat. Steel cutting ceremony was arranged. But RTE had to postpone it due to his busy personal program.

quote:
According to information published by ASFAT on September 20, 2024, Turkey has officially launched the construction of its first domestically designed and produced air defense destroyer, the TF-2000.
unquote.

Within the last year, IIRC, the idea of an in-between class of 4K-5K hull resurfaced (or that was the impression I got from defense circles).

Are there any developments regarding this project or is there even any intension, say like, make a lighter version of TF2000 around 6-7K tons that would completely meet all mission requirements and fill the gap comfortably between İstif class and TF2000?

edit:
Main mission is to keep up with TCG Anadolu and TF2000 on open seas and fulfilling all mission profiles necessary to perform independent fleet actions.
 

Yasar_TR

Experienced member
Staff member
Administrator
Messages
3,264
Reactions
145 16,388
Nation of residence
United Kingdom
Nation of origin
Turkey
Within the last year, IIRC, the idea of an in-between class of 4K-5K hull resurfaced (or that was the impression I got from defense circles).

Are there any developments regarding this project or is there even any intension, say like, make a lighter version of TF2000 around 6-7K tons that would completely meet all mission requirements and fill the gap comfortably between İstif class and TF2000?

edit:
Main mission is to keep up with TCG Anadolu and TF2000 on open seas and fulfilling all mission profiles necessary to perform independent fleet actions.
I think your question about the 4K to 5K hull, would best be answered by @Anmdt.
The in-between tonnage platform has been on the board for quite sometime, albeit having been put on the back burner a number of times.
It is however, the logical way to go.
Considering the proliferation of the anti ship missiles of all types, be it subsonic or supersonic or even hypersonic; They are going to be the main adversaries of any large seafaring assets you will have in your navy. Oceans and the seas of the world were big and endless expanses in the 1940s. You had to send planes searching for enemy fleets. Nowadays, satellites and long range radars on planes have rendered the seas and oceans all accessible. Your billion + dollar assets will be the number one targets for those missiles. They will be the first casualties of any modern war. I am not even going to mention the deadly submarines with their AShMs and modern long range torpedoes.

So, how clever is it to invest in these large and expensive ships? There is no place to hide in the sea, unless you are deeply submerged. If we had to invest in surface combatants, I would rather invest in two ocean faring smaller, 4 to 5K ton frigates than one large destroyer. Our last decision for a further 4 I-Class ships making the total of 8, was the right move.
 

Follow us on social media

Top Bottom