TR TF-X KAAN Fighter Jet

[monsteroftfx]

https://twitter.com/i/web/status/1645416218017267713

tandem or not

 

[Heartbang]

https://twitter.com/i/web/status/1645416218017267713

tandem or not

This tweet is utterly confusing

 

[boredaf]

There is a reason why basically only 3 makers of ejection seats exists which are M-B, Russia and China. Needs hundreds of tests to ensure secure ejection every single time.

I know, that is why I think it is critical that we look it into because they could cripple our serial production in the future with 1 sanction if they ever feel like.

 

[Manomed The Second]

Any progress about MMUs weapon bay drop systems? Indians showed their Inner bay systems last year any luck about ours?

https://twitter.com/i/web/status/1628270517693317120

@MADDOG

 

[BalkanTurk90]

I remember hearing it was cancelled as it was not feasible short term

Why is diffucult to produce or there are many companies that build them and even if USA ban it we can buy from others ?

 

[Memzy]

Why is diffucult to produce or there are many companies that build them and even if USA ban it we can buy from others ?

Martin Baker is British.

 

[Nilgiri]

Is this good or bad?

Both have their advantages/disadvantages.

Military Aircraft Emergency Escape & Ejection | PacSci EMC

When milliseconds matter, count on PacSci EMC’s pyrotechnic and energetic material solutions for mission critical success.

psemc.com

Generally fractured canopy advantages prevail in the argument when the aircraft has V/STOL capability given the higher chance of zero-zero type ejections happening (the Harrier is most notable study of it during its development and early deployment phase) than with conventional take-off + land aircraft.

This is why the F-35 essentially followed on from the Harrier canopy approach (time is of the full essence when zero-zero or close).....but we don't really see it in non VSTOL aircraft where conventional jettison is often favourable again.

 

[Windchime]

There is a reason why basically only 3 makers of ejection seats exists which are M-B, Russia and China. Needs hundreds of tests to ensure secure ejection every single time.

You've forgot Raytheon who makes ACES II.

 

[MADDOG]

https://twitter.com/i/web/status/1645416218017267713

tandem or not

The IWB configuration of the TF-X has indeed changed. But I can't directly specify what it will resemble. You're free to speculate though.

 

[MADDOG]

 

[MADDOG]

Any progress about MMUs weapon bay drop systems? Indians showed their Inner bay systems last year any luck about ours?

https://twitter.com/i/web/status/1628270517693317120

@MADDOG

Haven't heard the latest on those, sorry.

 

[Cabatli_TR]

• MMU LSS – Life Support System Project; It is a system that provides the oxygen, which it separates from the engine discharge air, to the pilot as breathing air instantly and at the right rate according to the physical conditions, and protects the pilot from the Anti-G load on the pilot depending on the maneuvers.

• MMU ExPS – Explosion Prevention System Project; It is the system that pressurizes the Nitrogen, which it separates from the engine discharge air, to the fuel tanks depending on the altitude, and ensures that the fuel tanks become inert. It reduces the risk of explosion caused by fuel vapor in the aircraft and prevents fuel boiling in the fuel tank.

• MMU HAVSET – Low Visibility Set Development Project for Air Duct; The electromagnetic design, optimization and model measurements of the Set, which provides low visibility on radar by placing it in the Air Channel, are carried out for the National Combat Aircraft to "Gave Invisibility to Radar".

• MMU FRESEÇ – Electromagnetic Modeling and Application of Frequency Selective Surfaces Providing Low Visibility; In order to provide frequency selective RF permeability in radome structures, frequency selective surfaces that are being modeled electromagnetically for "Achieving Radar Invisible Feature" to National Combat Aircraft; electromagnetic modeling, design, analysis and optimization software is being developed.

https://mam.tubitak.gov.tr/tr/haber/2022-yilinda-milli-teknoloji-hamlesini-destekleyecek-projelere-imza-attik

 

[Cabatli_TR]

Prototype products within the scope of "Development of Long Wavelength Infrared Trace Reduction Paint" and "Development of Radar Absorbing Paste (Sealant)" carried out with TAI, which will contribute to the projects we will develop regarding invisibility (trace reduction) technology, which is very critical for the 5th generation aircraft. We completed the production and passed the performance tests.

https://arproged.okan.edu.tr/tr/feeds/ulkemizin-bilimde-mukemmeliyetciligi-yakalamasina-ve-teknolojik-bagimsizligina-adanmis-bir-yil

 

[Cabatli_TR]

We have successfully completed the development, verification and acceptance activities of the RASEM software, which will be used in the electromagnetic design processes to give the National Combat Aircraft (MMU) invisibility under radar, and delivered the software to TAI. At the same time, we completed the set designs within the scope of the HAVSET-Phase 1 project to ensure the low visibility of the air duct of the MMU on radar and delivered to TAI; Thus, we have moved on to Phase 2 of the HAVSET project.

https://arproged.okan.edu.tr/tr/feeds/ulkemizin-bilimde-mukemmeliyetciligi-yakalamasina-ve-teknolojik-bagimsizligina-adanmis-bir-yil

 

[MADDOG]

TAI's additive manufacturing facility

-10 technicians and 16 engineers working at the facility.

-Focuses primarily on polymers and metals.

-3D printers

-Potentially the largest piece ever produced using this specific technology. This is a thermoplastic polymer that is resistant to high temperatures and high loads. This mold was used in order to produce a composite component of the Gökbey's fuselage. Using orthodox methods, a mold such as this might take 3-4 months to produce. TAI produced it in 3 weeks.

-Parts that were produced using 3D methods.

-Potentially a test module of ANKA-3's nozzle (could be wrong, but it looks a lot like it).

-ANKA UCAV's intake mold.

-----

 

[neosinan]

TAI's additive manufacturing facility

View attachment 56136


-10 technicians and 16 engineers working at the facility.

-Focuses primarily on polymers and metals.

View attachment 56137

View attachment 56138

-3D printers


View attachment 56139

-Potentially the largest piece ever produced using this specific technology. This is a thermoplastic polymer that is resistant to high temperatures and high loads. This mold was used in order to produce a composite component of the Gökbey's fuselage. Using orthodox methods, a mold such as this might take 3-4 months to produce. TAI produced it in 3 weeks.
View attachment 56140

-Parts that were produced using 3D methods.


View attachment 56142

-Potentially a test module of ANKA-3's nozzle (could be wrong, but it looks a lot like it).

View attachment 56143

-ANKA UCAV's intake mold.

-----

I am slightly disappointed from these pics, I was hoping they would be showing 3d printing PEEK by Now. A couple years ago, Company started in MIT (iirc), showed working with thermoplastics specifically PEEK in FDM 3D printing was commercially viable. They were selling their 3d printed parts to NASA and This material is already used in aviation. For Turkey's case, 3D printing made it perfect match for our low rate productions in military/aerospace industry. Our companies needs to use this material, It would improve trust to weight ratio in our aviation industry in meaningful way.

It looks like Europeans are also working on PEEK 3d printing as well, And They are using it on their moon mission this month.

The First 3D Printed Parts On The Moon

Orion Additive Manufacturing, a Berlin-based startup focusing on developing advanced 3D printing systems, is on its way to the moon. Well, their prints are! The European Space Agency (ESA) announced on January 12th that the very first European technology to make contact with the surface of the...

orion-am.com

 

[Zafer]

There was work going on with PEEK composites and the officials should know the value of it. I believe there is work on 3D printing of PEEK too. They should bring it to light when it is ripe.

 

[MADDOG]

TOYGUN EOTS to be used on Kızılelma and TF-X

 

[Heartbang]

TOYGUN EOTS to be used on Kızılelma and TF-X

View attachment 56175


View attachment 56176

TFX's IRST is SWIR, right?

 

[Afif]

TFX's IRST is SWIR, right?

probably not.